Prohlížení dle názvu

Zobrazují se záznamy 41090-41109 z 56057

    • Simulační výběr adaptivního algoritmu separace zdrojů v reálném čase pro EIT 

      Autor: Lukáš Daněk; Vedoucí práce: Silva Diogo; Oponent práce: Roubík Karel
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2023-08-30)
      Elektrická impedanční tomografie (EIT) je levná a neinvazivní zobrazovací metoda, která se široce používá k průběžnému monitorování umělé plicní ventilace na lůžku. Změny měřené impedance jsou však vyvolány nejen změnami ...

    • Simulační výpočty exotických opcí 

      Autor: Petr Sedlák; Vedoucí práce: Starý Oldřich; Oponent práce: Pavlátka Pavel
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-06-17)
      V diplomové práci jsou vytvořeny simulační výpočty pro ocenění asijské a calendar spread opce. Jako podkladové aktivum se používá futures kontrakt na ropu. Pro asijskou opci s fixní strike hodnotou jsou provedeny výpočty ...

    • SIMULATION ANALYSIS OF PREHEATER CHARGE TO THE ROTARY FURNACE 

      Autor: Mikula , Jan; Palička , Pavol; Kerekanic , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Mathematical modeling of heat aggregates is one of the fundamental methods of the mathematical modelling research. A mathematical model based on the method of elementary balances was created for the thermal treatment of ...

    • Simulation and fabrication of 3D printed optical planar multimode 1x2Y splitters 

      Autor: Hybler J.; Prajzler V.; Dlouhý J.
      (EDIS - Publishing Institution of the University of Zilina, 2019)
      This paper reports about design and simulation of planar optical multimodal splitters in combination with plastic optical fibers for the visible spectrum. These devices consisted of Veroclear RGD810 core and Polydimethylsiloxane ...

    • SIMULATION AND OPTIMIZATION OF POROUS BONE-LIKE MICROSTRUCTURES WITH SPECIFIC MECHANICAL PROPERTIES 

      Autor: Wit, Adrian; Wronski, Sebastian; Tarasiuk, Jacek
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Bone trabecular structure can be characterized as a connected network of mineral bars and plates with unique mechanical properties. Standard methods of producing bone-like structures based on periodic structures or foams ...

    • Simulation assessment of the headway under the ETCS L3 

      Autor: Nachtigall, Petr; Tischer, Erik
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      This paper deals with a simulation assessment of the impact of the introduction of ETCS L2 and L3 on the capacity of railway lines. The simulation itself is carried out in the OpenTrack simulation software, especially in ...

    • Simulation Environment for Validation of Automated Lane-Keeping System 

      Autor: Vlasák J.; Sojka M.; Hanzálek Z.
      (IARIA, 2023)
      Automated Driving Systems (ADS) need to be validated in a wide range of conditions to ensure the safety of their operation. It is impossible to validate everything in a real environment, and simulation is the only viable ...

    • SIMULATION MODEL BASED ON REGIONAL DEVELOPMENT AND VIRTUAL CHANGES 

      Autor: Dlask , Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      This paper reports on change as an indicator that can be provide more focused goals in studies of development. The paper offers an answer to the question: How might management gain information from a simulation model and ...

    • SIMULATION OF A MANEUVERING AIRCRAFT USING A PANEL METHOD 

      Autor: Schoř, Pavel; Kouřil, Martin; Daněk, Vladimír
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      We present a method for numerical simulations of a maneuvering aircraft, which uses a first-order unsteady panel method as the only source of aerodynamic forces and moments. By using the proposed method, it is possible to ...

    • Simulation of a Matrix Converter Fed Drive With Sliding Mode Control 

      Autor: Bauer , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Induction machines are among the most widely used electrical-to-mechanical converters in electric drives. Their advantageous robustness and simplicity goes hand-in-hand with complicated control. A converter with a suitable ...

    • Simulation of a multimaterial model for modified auxetic structures 

      Autor: Engel, Alexander; Jung, Anne
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Auxetic structures, which is a term used to describe materials with a negative Poisson’s ratio, show beneficial properties like a low density, a high energy absorption capacity and an increased indentation resistance. This ...

    • Simulation of AEB system testing 

      Autor: Zíta Patrik; Vedoucí práce: Jirovský Václav; Oponent práce: Vaculín Ondřej
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2017-08-21)
      Tato diplomová práce popisuje simulační nástroj, který byl vytvořen pro analýzu funkcí ADAS systémů a dynamiky vozidel. Nástroj byl vytvořen v aplikacích CarMaker a Microsoft Excel. Software lze použít jako SIL test pro ...

    • Simulation of Dynamic Properties of a Spindle and Tool System coupled with a Machine Tool Frame 

      Autor: Kolář P.; Janota M.; Sulitka M.
      (Springer, 2011)
      The cutting performance relates to the dynamic properties of the whole system of the tool, spindle and machine tool frame. The impact of the machine frame properties on the dynamic properties at the tool end point is studied ...

    • SIMULATION OF ELECTRIC AND HYBRID VEHICLES IN A VEHICLE SIMULATOR BASED ON A DETAILED PHYSICAL MODEL, FOR THE PURPOSE OF HMI EVALUATION 

      Autor: Rozhdestvensky, Dmitry; Fulem, Josef
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      In this article, we propose a software solution to study HMI of electric and hybrid electric vehicles in vehicle simulators. We will start with the description of a development process of a physical model for HEV simulation ...

    • Simulation of Feedforward Control Techniques to Improve Machines Feed Drives Tracking Performance 

      Autor: Ferkl J.; Novotný L.; Beudaert X.; Franco O.; Kolář P.
      (MM Science Journal, 2023)
      High speed machines such as laser cutting machines should realize movements with high accelerations. Dynamical limitations of the feed drives are typically related to the bandwidth of the control loops and the excitation ...

    • Simulation of Free Airfoil Vibrations in Incompressible Viscous Flow — Comparison of FEM and FVM 

      Autor: Sváček , Petr; Horáček , Jaromír; Honzátko , Radek; Kozel , Karel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper deals with a numerical solution of the interaction of two-dimensional (2-D) incompressible viscous flow and a vibrating profile NACA 0012 with large amplitudes. The laminar flow is described by the Navier-Stokes ...

    • SIMULATION OF HEAT TRANSPORT AT THE COOLING OF THE SUGAR SOLUTION IN A RECUPERATION EXCHANGER 

      Autor: Brestovič , Tomáš; Čarnogurská , Mária; Příhoda , Miroslav; Kubík , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The paper describes a mathematical model of the cooling process of a highly concentrated sugar solution in an exchanger with a specifically shaped heat exchanging surface of the cooling panels. An analysis of the individual ...

    • Simulation of laser drilling of Inconel X-750 and Ti-5Al-2.5Sn sheets using COMSOL 

      Autor: Hanon, Muammel M.; Taha, Ziad A.; Zsidai, László
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This study aims to investigate the simulation of laser drilling processes on Inconel X-750 and Ti-5Al-2.5Sn sheets. To this end, COMSOL Multiphysics 5.2 software was employed to carry out the virtual experiments. A JK 701 ...

    • SIMULATION OF LOW-GRADE COAL COMBUSTION IN REAL CHAMBERS OF ENERGY OBJECTS 

      Autor: Askarova , Aliya; Bolegenova , Saltanat; Bolegenova , Symbat; Beketayeva , Meruyert; Maximov , Valeriy; Nugymanova , Aizhan; Šafařík , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The aim of the work is to create new computer technologies for 3D modelling of heat and mass transfer processes in high-temperature physicochemically reacting environments that will allow to determine the aerodynamics of ...

    • SIMULATION OF RADIATIVE HEAT FLUX DISTRIBUTION UNDER AN INFRARED HEAT EMITTER 

      Autor: Loufek , Jan; Královcová , Jiřina
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The article deals with a heat radiation model used for heat flux calculation of an infrared heater. In general, we consider a system consisting of a set of objects, whereas a single object could stand for a heater, a ...