Zobrazují se záznamy 41070-41089 z 56012

    • Simulation of laser drilling of Inconel X-750 and Ti-5Al-2.5Sn sheets using COMSOL 

      Autor: Hanon, Muammel M.; Taha, Ziad A.; Zsidai, László
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This study aims to investigate the simulation of laser drilling processes on Inconel X-750 and Ti-5Al-2.5Sn sheets. To this end, COMSOL Multiphysics 5.2 software was employed to carry out the virtual experiments. A JK 701 ...
    • SIMULATION OF LOW-GRADE COAL COMBUSTION IN REAL CHAMBERS OF ENERGY OBJECTS 

      Autor: Askarova , Aliya; Bolegenova , Saltanat; Bolegenova , Symbat; Beketayeva , Meruyert; Maximov , Valeriy; Nugymanova , Aizhan; Šafařík , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The aim of the work is to create new computer technologies for 3D modelling of heat and mass transfer processes in high-temperature physicochemically reacting environments that will allow to determine the aerodynamics of ...
    • SIMULATION OF RADIATIVE HEAT FLUX DISTRIBUTION UNDER AN INFRARED HEAT EMITTER 

      Autor: Loufek , Jan; Královcová , Jiřina
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The article deals with a heat radiation model used for heat flux calculation of an infrared heater. In general, we consider a system consisting of a set of objects, whereas a single object could stand for a heater, a ...
    • SIMULATION OF SURFACE HEATING FOR ARBITRARY SHAPE’S MOVING BODIES/SOURCES BY USING R-FUNCTIONS 

      Autor: Plankovskyy , Sergiy; Shypul , Olga; Tsegelnyk , Yevgen; Tryfonov , Oleg; Golovin , Ivan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The purpose of this article is to propose an efficient algorithm for determining the place of an action of a heat source with a given motion law for a body of an arbitrary shape using methods of analytical geometry. The ...
    • SIMULATION OF T-JOINTS BETWEEN RHS STEEL MEMBERS WITH OFFSET IN ABAQUS CAE 

      Autor: Kalmykova, Svitlana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The current paper focuses on numerical simulation peculiarities of offset welded rectangular hollow section joints. Understanding the modelling techniques can result in easier and faster and above all correct outcomes from ...
    • Simulation of the compression test of the Zr1Nb fuel cladding ring 

      Autor: Smolík , Vojtěch; Endrychová, Alžběta; Krejčí, Jakub
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Fuel cladding is a first protective barrier against the loss of fission products that must withstand extreme conditions, from normal operation to final and interim dry storage. This hostile environment results in mechanical ...
    • Simulation of Various Modulation Strategies for Induction Motor Drive 

      Autor: Mehta Jigar Hemantbhai; Vedoucí práce: Bauer Jan; Oponent práce: Kyncl Jan
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-06-19)
      Vývoj výkonové elektroniky a polovodičové technologie vedl k vylepšení výkonových elektronických systémů. Pohony pohonů poháněné střídačem PWM jsou více variabilní a nabízejí v širokém rozsahu lepší účinnost ve srovnání s ...
    • Simulation of vehicle dynamics 

      Autor: Hingant Marine; Vedoucí práce: MAE supervisor; Oponent práce: MAE opponent
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-09-22)
      Simulation of vehicle dynamics. Simulation of vehicle dynamics
    • A Simulation study of 6.5kV Gate Controlled Diode 

      Autor: Gurunath Vishwamitra Yoganath; Quang Tien Tran; Eckel, Hans-Günter
      (České vysoké učení technické v Praze. České centrum IET, 2021)
      Gate Controlled Diode (GCD) with micro-pattern trench structure, allows charge carrier modulation at the anode region by gate control. This is utilized to operate the diode at low saturation mode and ...
    • Simulation tool for hybrid vehicle performances 

      Autor: Moreau Cléo; Vedoucí práce: MAE supervisor; Oponent práce: MAE opponent
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-09-22)
      Simulation tool for hybrid vehicle performances
    • Simulation, Measurement and Spectral Analysis of Night Sky light Background 

      Autor: Macúchová K.; Zicha J.
      (Transtech Publications, 2014)
      Spectral measurement of the night sky provides important information about natural light sources and light pollution. Analysis of spectral data enables identification of interesting events occurring in the atmosphere. We ...
    • Simulations of femtosecond laser pulse interaction with spray target 

      Autor: Pšikal J.; Klimo O.; Limpouch J.
      (Cambridge University Press, 2014)
      Laser interactions with spray targets (clouds of submicron droplets) are studied here via numerical simulations using two- dimensional particle-in-cell codes. Our simulations demonstrate an efficient absorption of laser ...
    • Simulator hypergravitace 

      Autor: Martin Kůrka; Vedoucí práce: Kučera Jaromír; Oponent práce: Kousal Jaroslav
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-08-24)
      Tato bakalářská práce se zabývá návrhem malé centrifugy. Obsahuje přehled možných řešení a vlastní konstrukční návrh centrifugy. Výsledkem celé práce je funkční 3D model.
    • Simulátor 32-bitového procesoru podporující instrukční sadu MIPS 

      Autor: Petr Nešpůrek; Vedoucí práce: Štepanovský Michal; Oponent práce: Buk Zdeněk
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-06-19)
      Hlavním cílem této práce je implementovat simulátor procesoru, který podporuje instrukční sadu MIPS32. Implementaci vyřeším jako dva programy - jádro simulátoru napsané v jazyce Verilog a obalující grafická aplikace v ...
    • Simulátor 32-bitového procesoru podporující instrukční sadu MIPS 

      Autor: Ondřej Marek; Vedoucí práce: Štepanovský Michal; Oponent práce: Kašpar Jiří
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-06-19)
      Tato práce se zabývá analýzou, návrhem a implementací systému, který umožňuje simulovat vykonávání programů na vybrané mikroarchitektuře. Řešeršní část práce se zabývá srovnáním již existujích řešení a popisuje technologie ...
    • Simulátor bezdrátových senzorů pro měření tlaku v pneumatikách 

      Autor: Martin Pešek; Vedoucí práce: Sojka Michal; Oponent práce: Kerner Jiří
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-06-10)
      Cílem této práce bylo vytvořit simulátor sady chytrých bezdrátových ventilků systému pro měření tlaku v pneumatikách auta (TPMS). Tento simulátor se plánuje použít pro potřeby testovacího oddělení ŠKODA AUTO. Tato práce ...
    • Simulátor bronchoskopie 

      Autor: Lukáš Čapek; Vedoucí práce: Daniel Matej; Oponent práce: Růžička Pavel
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2021-06-23)
      Předmětem této bakalářské práce je návrh a výroba simulátoru bronchoskopie pro výuku nových bronchologů. Požadavek na simulátor vzešel od Ústřední vojenské nemocnice, jelikož komerčně dostupné simulátory, kterými disponují, ...
    • Simulátor deskových her 

      Autor: Adam Španěl; Vedoucí práce: Richtr Radek; Oponent práce: Chvátil Vladimír
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2023-02-09)
      V práci jsou zanalyzovány systémy pro hraní deskových her online. Závěr je, že žádný z nich není vhodný pro vývoj deskových her. Byl tedy navrhnut a implementován systém specificky určený pro vývoj a testování deskových ...
    • Simulátor distribuované anténní řady 

      Autor: Kozák Jan; Vedoucí práce: Černý Viktor; Oponent práce: Moucha Alexandru
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2015-06-08)
      Cílem této práce je návrh a implementace simulátoru distribuované anténní řady.
    • Simulátor elektromagnetického pole FDTD pro studium algoritmů plánování léčby 

      Autor: Ksenia Kulakova; Vedoucí práce: Vrba Jan; Oponent práce: Merunka Ilja
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2022-06-13)
      Rakovina pánevní oblasti je jednou z nejčastějších příčin úmrtí na rakovinu, a proto vyžaduje zvláštní pozornost. Nedávno provedené studie ukázaly, že mikrovlnná hypertermie představuje neinvazivní metodu, kterou lze účinně ...