Prohlížení dle názvu

Zobrazují se záznamy 6991-7010 z 58654

    • Company Bankruptcy Models 

      Autor: Bemš, Július; Vedoucí práce: Starý, Oldřich
      (2015)

    • A Comparative Analysis of a Power System Stability with Virtual Inertia 

      Autor: Vetoshkin L.; Müller Z.
      (Multidisciplinary Digital Publishing Institute (MDPI AG), 2021)
      The paper investigates the stability of a power system with synchronverters. A synchronverter is a control strategy for voltage source converters that introduces virtual inertia by mimicking synchronous machines. The authors ...

    • COMPARATIVE ANALYSIS OF BEARING CAPACITY OF REINFORCED AND NON-REINFORCED RAILWAY EMBANKMENT 

      Autor: Jíra, Josef; Jírová, Jitka; Micka, Michal; Řezníčková, Jitka
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      A comparative analysis using the programme ANSYS (FEM) deals with the  generation of the computation model and with the assessment of the influence of the geogrids and the vertical lime-cement columns on the bearing capacity ...

    • Comparative analysis of binary classification algorithms 

      Autor: Zulfiia Galimzianova; Vedoucí práce: Bureš Miroslav; Oponent práce: Pinyagina Olga
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-06-19)
      GALIMZIANOVA, Zulfiia: Srovnávací analýza binárních algoritmů klasifikace. [Diplomová práce] - České vysoké učení technické v Praze. Fakulta elektrotechnická, Katedra informatiky. Vedoucí práce: Ing. Miroslav Bureš, Ph.D. ...

    • Comparative evaluation of set-level techniques in predictive classification of gene expression 

      Autor: Holec, Matěj; Kléma, Jiří; Železný, Filip; Tolar, Jakub
      (2012)
      Background: Analysis of gene expression data in terms of a priori-defined gene sets has recently received significant attention as this approach typically yields more compact and interpretable results than those produced by ...

    • Comparative flexural performance of steel fibre reinforced self-compacting concrete (SCFRC) ribbed slab with different fibre provision area 

      Autor: Ahmad, Hazrina; Mohd Hashim, Mohd Hisbany; Abu Bakar, Afidah; Ahmad Zakwan, Fariz Aswan; Ismail , Ruqayyah
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The flexural performance of three SCFRC ribbed slabs with different fibre provision area were investigated in this paper; in both ribs and flange (SFWS), ribs only with additional welded mesh in flange (SFT) and in ribs ...

    • COMPARATIVE MEASUREMENTS OF HEAD ANGULAR MOVEMENTS USING A CAMERA SYSTEM AND A GYROSCOPE SYSTEM 

      Autor: Socha , Vladimir; Kutilek , Patrik; Cakrt , Ondrej; Cerny , Rudolf
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      Assessments of body-segment angular movements are very important in the rehabilitation process. Head angular movements are measured and analyzed for use in studies of stability and posture. However, there is no methodology ...

    • Comparative static analysis of tunnelling methods NATM and ADECO-RS 

      Autor: Černá Vydrová Linda; Vedoucí práce: Barták Jiří; Oponent práce: Šejnoha Michal
      (České vysoké učení technické v Praze. Vypočetní a informační centrum., 2014-06-27)
      New Austrian Tunnelling Method (NATM) has been used almost exlusively in the Czech Republic in the last three decades. This method has many supporters, whose resistance to new methods and approaches prevents the integration ...

    • COMPARATIVE STUDY AND EMPIRICAL MODELLING OF PULVERIZED COCONUT SHELL, PERIWINKLE SHELL AND PALM KERNEL SHELL AS A POZZOLANS IN CONCRETE 

      Autor: Ikponmwosa , Efe Ewaen; Ehikhuenmen , Samuel Onosedeba; Irene , Karieren Kate
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Infrastructural development across the world is fast growing due to the rapid growth in population. This has resulted in consequently creating an increase in the demand for construction materials, especially cement. This ...

    • Comparative study of state space averaging and PWM with extra element theorem techniques for complex cascaded DC-DC Buck converter 

      Autor: Shete, Sangeeta; Joshi, Prasad
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Until now, most commonly used state space averaging and PWM techniques have been applied to different converter topologies and their advantages and disadvantages were stated. However, the superiority of an analytical ...

    • A comparative study of synchronverter stability 

      Autor: Vetoshkin L.; Müller Z.
      (Czechoslovakia Section IEEE, 2020)
      Electric grids, after a large scale installation of renewable energy sources, have dramatically changed. One of the major concerns in the operation of the modern power system is low grid inertia. Different approaches are ...

    • A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms 

      Autor: Altintas Y.; Cao H.; Holkup T.
      (Springer, 2011)
      This paper presents the effects of bearing preload mechanisms on the dynamic performance of high speed spindles. The comparisons of two main types of bearing preload-\"constant\" and \"rigid\"-mechanisms are provided using ...

    • COMPARING MORI-TANAKA METHOD AND FIRST-ORDER HOMOGENIZATION SCHEME IN THE VISCOELASTIC MODELING OF UNIDIRECTIONAL FIBROUS COMPOSITES 

      Autor: Valentová, Soňa; Šejnoha, Michal; Vorel, Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      A comparative study of the viscous response of polymer matrix based fibrous composites predicted by the Mori-Tanaka method and finite element simulations based on the 1st order homogenization theory is presented. Aligned ...

    • Comparing the environmental performances of new and renovated school buildings 

      Autor: Mancinelli, Oscar; Fantilli, Alessandro Pasquale; Chiaia, Bernardino
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Evaluating which is the best choice between renovating an existing construction or building a new structure in countries like Italy, where a huge post-war un-listed building heritage does not satisfy the current standards ...

    • COMPARING THE HOEK-BROWN AND MOHR-COULOMB FAILURE CRITERIA IN FEM ANALYSIS 

      Autor: Poklopová, Tereza; Pavelcová, Veronika; Šejnoha, Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper revisits the issue of a potential substitutions of the Hoek-Brown failure model by the standard Mohr-Coulomb model in the stability analysis of rock masses. The derivation of equivalent shear strength parameters ...

    • Comparision of the walk techniques for fitness state space analysis in vehicle routing problem 

      Autor: Agárdi, Anita; Kovács, László; Bányai, Tamás
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The Vehicle Routing Problem (VRP) is a highly researched discrete optimization task. The first article dealing with this problem was published by Dantzig and Ramster in 1959 under the name Truck Dispatching Problem. Since ...

    • Comparison and optimization of 2 approaches for the modelling of a carbon fibers reinforced thermoplastic 

      Autor: El Archi Youssera; Vedoucí práce: MAE supervisor; Oponent práce: MAE opponent
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-09-22)
      Comparison and optimization of 2 approaches for the modelling of a carbon fibers reinforced thermoplastic

    • COMPARISON BETWEEN 2D TURBULENCE MODEL ESEL AND EXPERIMENTAL DATA FROM AUG AND COMPASS TOKAMAKS 

      Autor: Ondac , Peter; Horacek , Jan; Seidl , Jakub; Vondrácek , Petr; Müller Werner, Hans; Adámek , Jirí; Nielsen Henry, Anders
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      In this article we have used the 2D fluid turbulence numerical model, ESEL, to simulate turbulent transport in edge tokamak plasma. Basic plasma parameters from the ASDEX Upgrade and COMPASS tokamaks are used as input for ...

    • Comparison Between Common Seismic Codes Used in Nepal and Eurocode 8: Study Case Analysis of RC Building 

      Autor: Shrestha Anup; Vedoucí práce: Mazzolani Federico Massimo; Oponent práce: De Martino Attillio
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-02-01)
      Earthquake risks and vulnerability to building structures have been identified by many countries and thus seismic analysis and design have become an integral part of their structural design process. Nepal has also recognized ...

    • Comparison between concrete stress diagrams according to the Brazilian standard ABNT NBR 6118: 2014 

      Autor: Oliveira, Victor Hugo Dalosto de; Carvalho, Rodolfo Alves; Borges, Luana Ferreira; Martins, Paulo Chaves de Rezende; Neves, Rodolfo Rabelo; Siqueira, João Paulo de Almeida; Oliveira, Gabriel Yves da Silva; Anhaia, Cintia Adriana Azevedo de Liz
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      This study aims to compare methods for the determination of concrete properties by means of the stress diagrams present in the Brazilian standard ABNT NBR 6118: 2014. The area under the stress diagram, the internal reactions, ...