Zobrazují se záznamy 168-187 z 58000

    • A MYOELECTRIC PROSTHETIC ARM CONTROLLED BY A SENSOR-ACTUATOR LOOP 

      Autor: Kutílek , Patrik; Hýbl , Jan; Mareš , Jakub; Socha , Vladimír; Smrčka , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      This paper describes new methods and systems designed for application in upper extremity prostheses. An artificial upper limb with this system is a robot arm controlled by EMG signals and a set of sensors. The new multi-sensor ...
    • A Network Simulation Tool for Task Scheduling 

      Autor: Votava , Ondřej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Distributed computing may be looked at from many points of view. Task scheduling is the viewpoint, where a distributed application can be described as a Directed Acyclic Graph and every node of the graph is executed ...
    • A Neural Network Model for Predicting NOx at the Mělník 1 

      Autor: Bukovský , Ivo; Kolovratník , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents a non-conventional dynamic neural network that was designed for real time prediction of NOx at the coal powder power plant Mělnik 1, and results on real data are shown and discussed. The paper also ...
    • A NEW AND ADAPTIVE SECURITY MODEL FOR PUBLIC COMMUNICATION BASED ON CORRELATION OF DATA FRAMES 

      Autor: Haider Tarish, Haider; Muhsen Halboot, Dhiaa; Shahadib Ismael, Haider; See Hang, Ong
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Recent developments in communication and information technologies, plus the emerging of the Internet of Things (IoT) and machine to machine (M2M) principles, create the need to protect data from multiple types of attacks. ...
    • A New Concept of PTP Vector Network Analyzer 

      Autor: Závodný, Vadim; Hoffmann, Karel; Škvor, Zbyněk
      (IEEE, 2004-12)
      A new concept for vector network analyzers design based on a perturbation two-port (PTP) is presented. The approach uses redundant states of the PTP. The best states of the PTP for a certain place in Smith chart and frequency ...
    • A NEW FASTENER TO ENSURE THE RELIABILITY OF A PASSENGER CAR BODY ON A TRAIN FERRY 

      Autor: Lovska, Alyona; Fomin , Oleksij
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      To ensure the strength of the passenger car bodies during transportation on train ferries, it is proposed to mount fastening elements of chain binders on the body bolster beams. The principle of such an element is based ...
    • A new laboratory test to assess the resistance of porous materials to salt crystallization: assessment of natural stone painted with limewashes 

      Autor: Vivek Namdev; Vedoucí práce: Slížková Zuzana; Oponent práce: Pavlíková Milena
      (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2022-07-29)
      ABSTRAKT Nový laboratorní test k posouzení odolnosti porézních materiálů vůči krystalizaci solí - posouzení přírodního kamene s povrchovou úpravou vápennými nátěry Vodorozpustné soli jsou velmi často příčinou degradace ...
    • A new performance test to evaluate the sulfate resistance of concrete by tensile strength measurements 

      Autor: Feldrappe, Volkert; Haufe, Johannes; Ehrenberg, Andreas; Vollpracht, Anya; Matschei, Thomas
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Concrete structures without sufficient durability can be damaged by sulfates in groundwater and from surrounding rock layers. To evaluate the performance of a concrete mixture, precise and performance-oriented test methods ...
    • A New Review of Old Novae 

      Autor: Pagnotta, A.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Novae are certainly very exciting at the time of their eruptions, and there is much work left to be done in understanding all of the details of that part of their existence, but there is also much to be learned by looking ...
    • A note on entanglement classification for tripartite mixed states 

      Autor: Zhao, Hui; Liu, Yu-Qiu; Wang, Zhi-Xi; Fei, Shao-Ming
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      We study the classification of entanglement in tripartite systems by using Bell-type inequalities and principal basis. By using Bell  unctions and the generalized three dimensional Pauli operators, we present a set of Bell ...
    • A Novel Approach in the WIMP Quest: Cross-Correlation of Gamma-Ray Anisotropies and Cosmic Shear 

      Autor: Regis, Marco
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      We present the cross-correlation angular power spectrum of cosmic shear and gamma-rays produced by the annihilation/decay of Weakly Interacting Massive Particle (WIMP) dark matter (DM), and by astrophysical sources. We ...
    • A NOVEL BCG SENSOR-ARRAY FOR UNOBTRUSIVE CARDIAC MONITORING 

      Autor: Böhm , Anna; Brüser , Christoph; Leonhardt , Steffen Leonhardt
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      Unobtrusive heart rate monitoring is a popular research topic in biomedical engineering. The reason is that convential methods, e.g. the clinical gold standard electrocardiography, require conductive contact to the human ...
    • A Novel Method of Noise Reduction in the Low-frequency Parametric Amplifier 

      Autor: Vlk, Michal; Vedoucí práce: Skalický, Petr; Škvor, Zdeněk
      (2014-05-21)
    • A NOVEL PROJECTION ALGORITHM FOR PRODUCTION LAYOUT EXTRACTION FROM POINT CLOUDS 

      Autor: Bureš , Marek; Martirosov , Sergo; Polcar , Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The paper is focused on point cloud data processing obtained by 3D laser scanning. The scanning devices are at a very advanced level and after reaching their possible maximum scanning speeds, manufacturers are now more ...
    • A novel vector network analyzer 

      Autor: Hoffmann, Karel; Skvor, Zbyněk
      (IEEE, 1998-12)
      A calibration procedure for a perturbation two-port vector network analyzer is presented. It consists of a variable perturbation two-port placed between a device-under-test and a scalar network analyzer. A measured vector ...
    • A Numerical Study of Wind Flow Over a Coal Storage Shelter 

      Autor: Bodnár , Tomáš; Beneš , Ludek; Pirkl , Luboš; Gulíková , Eva
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents some of the main numerical results obtained while simulating the wind flow over a shelter covering a coal storage. The aim of this numerical study was to evaluate the change in flow patterns caused by ...
    • A Planar Version of A Slotline Leaky Wave Antenna with a Stacked Substrate 

      Autor: Macháč, J.; Pavliš, A.; Houška, M.; Zehentner, J.
      (IEEE, 2008-05)
      This paper presents a new version of a leaky wave antenna based on a conductor-backed slotline with a stacked substrate. The advantage of this new structure is its flat top surface, due to the antenna being fed from the ...
    • A precise gradiometer suitable for space applications 

      Autor: Janošek, Michal; Vedoucí práce: Ripka, Pavel; Platil, Antonín
      (2014-09-25)
    • A procedure to derive partial safety factors in textile-reinforced concrete members 

      Autor: Schulze-Ardey, Jan Philip; Feiri, Tânia; Ricker, Marcus; Hegger, Josef
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      In the last decades, modern technological and research developments of textile-reinforced concrete have led to extensive applications in building and civil engineering structures all over the world. Examples of textile-reinforced ...
    • A Pulverized Coal-Fired Boiler Optimized for Oxyfuel Combustion Technology 

      Autor: Dlouhý , Tomáš; Dupal , Tomáš; Dlouhý , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents the results of a study on modifying a pulverized coal-fired steam boiler in a 250 MWe power plant for oxygen combustion conditions. The entry point of the study is a boiler that was designed for standard ...