Measurement and creation of digital technical map
Zaměření a vyhotovení digitální technické mapy
Authors
Supervisors
Reviewers
Editors
Other contributors
Journal Title
Journal ISSN
Volume Title
Publisher
České vysoké učení technické v Praze
Czech Technical University in Prague
Czech Technical University in Prague
Date of defense
2023-06-28
Abstract
Práce se věnuje IS DMVS. Její hlavní náplní je zaměření různými technologiemi na zadané lokalitě a vyhotovení dokumentace DTM kraje podle aktuálně platné vyhlášky č. 393/2020 Sb., o digitální technické mapě kraje. Dokumentace se skládá ze tří částí, a to ZPS, TI a DI, a dále podle vlastníků, uživatelů těchto částí. Výsledkem práce je porovnání ať už výsledných dokumentací, nebo i ekonomické a časové rozvahy daných měřických metod pro jednotlivé využití daných částí dokumentace. Práce má sloužit jako možný podklad pro rozhodování zeměměřické metody pro sběr dat DTM kraje.
The thesis focuses on the DMVS IS. Its main task is to survey the specified location using various technologies and to prepare the DTM documentation of the region according to the currently valid Decree No. 393/2020 Coll., on the digital technical map of the region. The documentation consists of three parts, namely ZPS, TI and DI, and then according to the owners and users of these parts. The result of the work is a comparison of both the resulting documentation and the economic and time balance of the given measurement methods for individual use of the given parts of the documentation. The thesis is intended to serve as a possible basis for the decision-making of the surveying method for the collection of DTM data of the region.
The thesis focuses on the DMVS IS. Its main task is to survey the specified location using various technologies and to prepare the DTM documentation of the region according to the currently valid Decree No. 393/2020 Coll., on the digital technical map of the region. The documentation consists of three parts, namely ZPS, TI and DI, and then according to the owners and users of these parts. The result of the work is a comparison of both the resulting documentation and the economic and time balance of the given measurement methods for individual use of the given parts of the documentation. The thesis is intended to serve as a possible basis for the decision-making of the surveying method for the collection of DTM data of the region.
Description
Keywords
IS DMVS, DTM kraje, statické laserové skenování, GNSS, LiDAR, DJI, SOKKIA, GeoSLAM, FARO, videogrammetrie, fotogrammetrie, mobilní laserové skenování, ZPS, DI, TI, 3Dsurvey, AutoCAD 2023, GeoWIN, mračno bodů, 3D výkres, JVF DTM, ČÚZK, totální stanice, eGovernment, IS DMVS, DTM of regions, static laser scanning, GNSS, LiDAR, DJI, SOKKIA, GeoSLAM, FARO, videogrammetry, photogrammetry, mobile laser scanning, ZPS, DI, TI, 3Dsurvey, AutoCAD 2023, GeoWIN, point cloud, 3D drawing, JVF DTM, ČÚZK, total station, eGovernment
Citation
Underlying research data set URL
Permanent link
Rights/License
A university thesis is a work protected by the Copyright Act of the Czech Republic. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one`s own expense. The use of thesis should be in compliance with the Copyright Act.
Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem v platném znění.
Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem v platném znění.