ČVUT DSpace
  • Search DSpace
  • Čeština
  • Login
  • Čeština
  • Čeština
View Item 
  •   ČVUT DSpace
  • Czech Technical University in Prague
  • Faculty of Mechanical Engineering
  • Department of Aerospace Engineering
  • Master Theses - 12122
  • View Item
  • Czech Technical University in Prague
  • Faculty of Mechanical Engineering
  • Department of Aerospace Engineering
  • Master Theses - 12122
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Návrh panelové kompozitní konstrukce velkoobjemové vakuové komory

Design of panel construction of high capacity composite vacuum chamber

Type of document
diplomová práce
master thesis
Author
Adam Čumrda
Supervisor
Barák Karel
Opponent
Kousal Jaroslav
Field of study
Letadlová a kosmická technika
Study program
Letectví a kosmonautika
Institutions assigning rank
ústav letadlové techniky



Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html
Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item record
Abstract
Diplomová práce popisuje problematiku konstrukce vakuových komor pro testování kosmické techniky v planetárních podmínkách Marsu. Hlavním cílem práce je vytvoření koncepčního návrhu panelové kompozitní konstrukce kompozitní velkoobjemové komory dle zadaných požadavků na konstrukci. Práce se zabývá návrhem a výrobou modulární panelové kompozitní konstrukce včetně pevnostního návrhu a návrhu zkoušky pro validaci numerického výpočtu. Dle provedených numerických výpočtů byla zvolena kompozitní skladba s ohledem na nízké výrobní náklady komory v porovnání s komerčními řešeními. V práci je dále navržen způsob těsnění mezi panely a experimentálním měřením je odhadnut celkový únik komory. Dále je diskutován vhodný způsob vytváření vakua v komoře a je vypočtena potřebná rychlost čerpání pro případné pokračování v projektu. Výsledkem práce je stručná studie proveditelnosti projektu konstrukce vakuové komory navržené v rámci diplomové práce na Ústavu letadlové techniky FS ČVUT včetně vyčíslení předpokládaných nákladů pro výrobu a montáž konstrukce komory.
 
This master thesis discusses the issue of designing high-capacity composite vacuum chamber designed to test cosmic technology in the planetary environment of Mars. The main objective of this thesis is to design a composite panel construction of a high-capacity composite vacuum chamber prototype as per the assigned/specified construction requirements. This thesis focuses on a design and a fabrication/manufacturing of a modular composite construction including a strength design, as well as designing a test to validate numerical calculations. Based on the initial calculations, a composition model was chosen as to reflect lower production costs of the chamber in comparison to any available commercial solutions. The thesis then proceeds to designing an insulation between the individual panels and using an experimental measurement, an estimated overall leakage of the chamber. Further discussion focuses on the best possible means of creating a vacuum in the chamber and a pump speed necessary in case the project is to be pursued farther. The conclusion of this thesis is a brief case study of feasibility of the project of constricting the vacuum chamber designed as a result of a master thesis to Faculty of mechanical engineering at CTU, including a calculation of estimated costs of construction and assembly of the chamber.
 
URI
http://hdl.handle.net/10467/96899
View/Open
PLNY_TEXT (7.072Mb)
POSUDEK (622.5Kb)
POSUDEK (771.3Kb)
Collections
  • Diplomové práce - 12122 [124]

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Contact Us | Send Feedback
Theme by 
@mire NV
 

 

Useful links

CTU in PragueCentral library of CTUAbout CTU Digital LibraryResourcesStudy and library skillsResearch support

Browse

All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

My Account

Login

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Contact Us | Send Feedback
Theme by 
@mire NV