Chlazení vysokých tepelných toků ve fúzních reaktorech
Cooling of high heat fluxes in fusion reactors
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Vít Šneberger
Vedoucí práce
Entler Slavomír
Oponent práce
Štěpánek Jan
Studijní obor
bez oboruStudijní program
Teoretický základ strojního inženýrstvíInstituce přidělující hodnost
ústav energetikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
První část bakalářské práce prezentuje formou rešerše vývoj a současný stav výzkumu jaderné fúze. V rešerši jsou dále uvedeny metody a technologie chlazení vysokých tepelných toků ve fúzních reaktorech. Ve druhé části práce jsou pomocí dvourozměrného parametrického modelu vypočteny teploty materiálů podél první stěny, přičemž struktura modelu se zakládá na uspořádání první stěny HCPB2015. Dosažené výsledky, shrnuty v grafických závislostech, ukazují, že limitními hodnotami pro udržení teplot materiálů pod dovolenými maximy je tepelný tok q''=1 MW/m^2 a hmotnostní tok chladicího média m=120 g/s. The first part of the bachelor thesis presents in a form of research development and current state of nuclear fusion research. The research part also contains methods and technologies of cooling of high heat fluxes in fusion reactors. In the second part of the thesis there is a parametric model used for calculation of temperatures along the first wall, where the structure of the model is based on the HCPB2015 first wall. Results, which are summarized in graphs, show that the limit values to keep temperatures of the materials under allowed maximums of heat flux and mass flux of the coolant are q''=1 MW/m^2 and m=120 g/s, respectively.
Kolekce
- Bakalářské práce - 12115 [189]