Komunikační brána pro smart home
Smart home communication gateway
Type of document
diplomová prácemaster thesis
Author
Vlastimil Lhotecký
Supervisor
Janíček Vladimír
Opponent
Straka Tomáš
Study program
Inteligentní budovyInstitutions assigning rank
katedra měřeníRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
V této práci se zabývám návrhem a realizací univerzální komunikační brány, určené primárně pro otevřené Smart Home ústředny jako je OpenHAB, Home Assistant nebo Node-RED, která umožňuje bezdrátově komunikovat s koncovými zařízeními využívajícími technologie Bluetooth, Zigbee nebo Wi-Fi. Brána samotná obsahuje několik senzorů pro měření nejčastěji požado-vaných parametrů prostředí. Pro komunikaci s ústřednou je použito Ethernetové rozhraní, které zá-roveň zajišťuje napájení brány. Přenos dat je realizován protokolem MQTT a konfigurace pomocí webového rozhraní. Během práce jsem zhodnotil nejvhodnější komponenty, navrhl, realizoval a otestoval zařízení po HW i SW stránce a porovnal výsledek s případnými al-ternativami dostupnými na trhu. The aim of this thesis was to design and create a universal communication ga-teway, mainly intended for open Smart Home hubs like OpenHAB, Home As-sistant or Node-Red, that would allow wireless communication with end devices using Bluetooth, Zigbee or Wi-Fi technology. The gateway itself includes a few sensors for measuring the most commonly requested environmental parameters. An Ethernet interface is used to communicate with a Smart Home hub as well as to provide the gateway with power. Data transfer is realized using the MQTT protocol, while a web interface is used for configuration. I’ve gone through various available components and selected the most suitable ones for the project, then used them to design and implement the ga-teway from both a HW and SW standpoint and compared my end result with alternatives available on the market.
Collections
- Diplomové práce - 13138 [374]