Structural Project of Dweling House
Structural Project of Dweling House
Typ dokumentu
diplomová prácemaster thesis
Autor
Singh Udham
Vedoucí práce
Kulhánek František
Oponent práce
Novotný Marek
Studijní obor
Building StructuresStudijní program
Civil EngineeringInstituce přidělující hodnost
katedra konstrukcí pozemních stavebPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Diplomová práce poskytuje náhled do problematiky konstrukčního řešení obytného domu přizpůsobeného podmínkám v České republice a ve Španělsku. Práce se zabývá především různými nosnými systémy, které by mohly být použity pro stejný typ budovy v Čechách a ve Španělsku. Studie je zaměřena na nalezení nejoptimálnějšího nosného systému, který by mohl být použit v České republice z hlediska stavebních standardů, vhodné konstrukce, bezpečnosti a estetiky. Předběžné statické výpočty a výpočty schodiště byly provedeny pro všechny čtyři názorné možnosti. Pro výpočet efektivity navržené (dle českých standardů) tepelné izolace u obvodových konstrukcí a střechy byl použit program Teplo. Výkresová dokumentace byla vyhotovena pro všechny čtyři nosné konstrukce. Pro nejvhodnější konstrukční systém byly rozkresleny architektonické a konstrukční výkresy přízemí, typického podlaží, střechy a řezu budovou v měřítku 1:50, detaily v měřítku 1:10. This master thesis work gives an insight into the typical construction practice adopted in Spain and Czech Republic for the construction of the dwelling houses. The thesis mainly revolves around the different bearing systems that can be chosen for the same type of building in Spain and in Czech Republic. The study is concentrated on selecting the most optimized bearing system that can be used in Czech Republic from the four possible ways depending on the building standards, convenient construction, safety and aesthetics. The preliminary static calculations and staircase calculations have been done for all the four practical options. The Czech software Teplo is used to calculate the efficiency of the selected insulation for the external walls and the roof according to the Czech standards. The drawings are made for all the four-structural bearing system. The architectural and structural drawings of ground floor plan, typical floor plan, roof plan, section of the building and details are prepared to the scale 1:50 for the most suited bearing system.
Kolekce
- Diplomové práce - 11124 [670]