Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns
Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns
dc.contributor.advisor | Koltsakis Efthymios | |
dc.contributor.author | Ryan Bona | |
dc.date.accessioned | 2017-04-25T17:36:45Z | |
dc.date.available | 2017-04-25T17:36:45Z | |
dc.date.issued | 2017-01-08 | |
dc.identifier | KOS-695600289005 | |
dc.identifier.uri | http://hdl.handle.net/10467/68095 | |
dc.description.abstract | Objective of this work is to study the proposed structural sections in design situation and to investigate possible design models. The expected structural behavior of the column is a mixture between the open and closed cross-section. These cases will be investigated through numerical study. In this thesis presented a comprehensive parametric study on the ultimate strength of proposed coldformed steel columns using the Finite Element package ABAQUS. FE models were first developer for columns by using automation that was made through MATLAB and Python script. The buckling and non-linear FE study was done for the investigation of local (L), distortional (D) and global (G) possible buckling failures and ultimate resistance, respectively. Modelling issues such as boundary conditions, meshing, initial imperfections, material models, and non-linear solution controls in FEA were also addressed. | cze |
dc.description.abstract | Objective of this work is to study the proposed structural sections in design situation and to investigate possible design models. The expected structural behavior of the column is a mixture between the open and closed cross-section. These cases will be investigated through numerical study. In this thesis presented a comprehensive parametric study on the ultimate strength of proposed coldformed steel columns using the Finite Element package ABAQUS. FE models were first developer for columns by using automation that was made through MATLAB and Python script. The buckling and non-linear FE study was done for the investigation of local (L), distortional (D) and global (G) possible buckling failures and ultimate resistance, respectively. Modelling issues such as boundary conditions, meshing, initial imperfections, material models, and non-linear solution controls in FEA were also addressed. | eng |
dc.language.iso | ENG | |
dc.publisher | České vysoké učení technické v Praze. Vypočetní a informační centrum. | cze |
dc.publisher | Czech Technical University in Prague. Computing and Information Centre. | eng |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html | eng |
dc.rights | Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html | cze |
dc.subject | Lattice tower, Thin-walled element, Semi-closed polygonal section, Finite element analysis, Parametric study, Buckling, Python script, Matlab script, Eurocode 3, Factorial design | cze |
dc.subject | Lattice tower, Thin-walled element, Semi-closed polygonal section, Finite element analysis, Parametric study, Buckling, Python script, Matlab script, Eurocode 3, Factorial design | eng |
dc.title | Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns | cze |
dc.title | Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns | eng |
dc.type | diplomová práce | cze |
dc.type | master thesis | eng |
dc.date.accepted | 2017-01-20 | |
dc.contributor.referee | Manoleas Panagiotis | |
theses.degree.discipline | Sustainable Constructions under Natural Hazards and Catastrophic Events | cze |
theses.degree.grantor | katedra ocelových a dřevěných konstrukcí | cze |
theses.degree.programme | Civil Engineering | cze |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
-
Diplomové práce - 11134 [610]