Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns
Finite element modelling and parametric studies of semi-closed thin-walled steel polygonal columns
Typ dokumentu
diplomová prácemaster thesis
Autor
Ryan Bona
Vedoucí práce
Koltsakis Efthymios
Oponent práce
Manoleas Panagiotis
Studijní obor
Sustainable Constructions under Natural Hazards and Catastrophic EventsStudijní program
Civil EngineeringInstituce přidělující hodnost
katedra ocelových a dřevěných konstrukcíObhájeno
2017-01-20Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Objective of this work is to study the proposed structural sections in design situation and to investigate possible design models. The expected structural behavior of the column is a mixture between the open and closed cross-section. These cases will be investigated through numerical study. In this thesis presented a comprehensive parametric study on the ultimate strength of proposed coldformed steel columns using the Finite Element package ABAQUS. FE models were first developer for columns by using automation that was made through MATLAB and Python script. The buckling and non-linear FE study was done for the investigation of local (L), distortional (D) and global (G) possible buckling failures and ultimate resistance, respectively. Modelling issues such as boundary conditions, meshing, initial imperfections, material models, and non-linear solution controls in FEA were also addressed. Objective of this work is to study the proposed structural sections in design situation and to investigate possible design models. The expected structural behavior of the column is a mixture between the open and closed cross-section. These cases will be investigated through numerical study. In this thesis presented a comprehensive parametric study on the ultimate strength of proposed coldformed steel columns using the Finite Element package ABAQUS. FE models were first developer for columns by using automation that was made through MATLAB and Python script. The buckling and non-linear FE study was done for the investigation of local (L), distortional (D) and global (G) possible buckling failures and ultimate resistance, respectively. Modelling issues such as boundary conditions, meshing, initial imperfections, material models, and non-linear solution controls in FEA were also addressed.
Kolekce
- Diplomové práce - 11134 [610]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Simulace chyby převodu pomocí MKP
Autor: Yujin Kim; Vedoucí práce: Kazda Lukáš; Oponent práce: Vašíček Michal
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-09-02)This thesis contributes to a better understanding and an effective approach to analyze transmission error by using the finite element method on Abaqus. By the means of changing the main attributes of the gear model, we may ... -
Optimalizace betonových prvků pomocí genetických algoritmů
Autor: Kuvaldina Margarita; Vedoucí práce: Petřík Martin; Oponent práce: Bílý Petr
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-06-21)This abstract can include spoilers to the thesis. If you would like to enjoy the process of reading more, I kindly suggest you skipping it and getting back to it later on. In the following work, the author has developed a ... -
Development of a nonlinear macro element for URM walls
Autor: Julian Miles Richter; Vedoucí práce: Boesen Niklas; Oponent práce: Klinkel Sven
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-02-12)Masonry is a widespread method of construction to this day and has proven particularly successful in the construction of office and residential buildings. This is mainly due to the fact that masonry has physical advantages ...