Tepelná ztráta vodního akumulačního zásobníku
Heat Loss of a Water Storage Tank
Typ dokumentu
diplomová prácemaster thesis
Autor
Rudolf Vaclík
Vedoucí práce
Matuška Tomáš
Oponent práce
Šourek Bořivoj
Studijní obor
Bez specializaceStudijní program
Technika prostředíInstituce přidělující hodnost
ústav techniky prostředíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tato diplomová práce se zabývá problematikou tepelných ztrát vodních akumulačních zásobníků. Cílem této práce je popsat vodní zásobníky, zmínit různé možnosti jejich konstrukce a zjistit vliv těchto modifikací na jeho tepelnou ztrátu. Dalším účelem této diplomové práce je zorientovat se v normách, podle kterých se tepelná ztráta vodních zásobníků tepla stanovuje a porovnat je mezi sebou. Dalším cílem je popsat dodatkové tepelné ztráty vodních akumulačních zásobníků, konkrétně se jedná o tepelné mosty a vnitřní recirkulaci v potrubí. Tyto ztráty vznikají na připevněných ventilech a trubkách k zásobníku. V druhé části práci se provede stanovení tepelné ztráty dvou vodních akumulačních zásobníků experimentem, v tomto měřené bude zkoumán nárůst tepelné ztráty při různých teplotách a různém osazení. Závěrečným cílem je vytvořit výpočetní model, stanovující tepelnou akumulačních zásobníků při různých podmínkách. Ten se seřídí pomocí výsledků z předešlého experimentu. Dále bude výpočet celého modelu zjednodušeně zapsán pomocí vzorce, jehož vstupy budou teplotní rozdíl ΔT, počet připevněných ventilů n a počet připevněných trubek k a výstupem tepelná ztráta akumulačního vodního zásobníku Փ. This thesis deals with the issue of thermal losses in water storage tanks. The objective of this thesis is to describe water storage tanks, mention various construction options, and determine the impact of these modifications on their thermal losses. Another aim of this thesis is to familiarize oneself with the norms used to determine the thermal losses of water storage tanks and compare them among each other. Next goal is to describe additional heat losses in water storage tanks, specifically thermal bridges and internal recirculation in pipelines. These losses occur at attached valves and pipes connected to the storage tank. In the second part of the thesis, the thermal loss of two water storage tanks will be determined through experiment. In this phase, the focus will be on examining the increase in thermal loss at different temperatures and with different configurations. The final objective is to develop a computational model that calculates the thermal losses of water storage tanks under different conditions. This model will be calibrated using the results from the previous experiment. Furthermore, the calculation of the entire model will be simplified using a formula, with inputs including the temperature difference T, the number of attached valves n, the number of attached pipes k, and the output being the thermal loss of the water storage tank Փ.
Kolekce
- Diplomové práce - 12116 [180]