Strukturní charakteristiky slitiny 6082 v podmínkách kování
Structure characteristics of alloy 6082 under forging conditions
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Ondřej Krejčí
Vedoucí práce
Horník Jakub
Oponent práce
Očenášek Vladivoj
Studijní obor
bez oboruStudijní program
Teoretický základ strojního inženýrstvíInstituce přidělující hodnost
ústav materiálového inženýrstvíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Hlavním tématem bakalářské práce je analýza strukturních charakteristik polotovarů vyrobených metodou horizontálního kontinuálního lití (HCM) a jejich změn za působení různých vlivů - jednostupňové nebo vícestupňové deformace či tepelného zpracování. Cílem práce je analýza velikosti zrna, hranice zrn, orientace zrn v různých stavech zpracování pomocí metody difrakce zpětně odražených elektronů (EBSD). Dalším cílem je analýza chemického složení energiově disperzní spektroskopií (EDS) v různých stavech. Posledním cílem práce je hodnocení lomových ploch vzorků po zkoušce tahem. The main topic of the bachelor’s thesis is the analysis of structural characteristics of semi-finished products produced by the method of horizontal continuous casting (HCM) and their changes under the influence of various processing parameters - single-stage or multi-stage deformation or the heat treatment. The aim of the work is the analysis of grain size, grain boundaries, grain orientation in different states of processing using the backscattered electron diffraction (EBSD) method. Another goal is the analysis of the chemical composition by energy dispersive spectroscopy (EDS) in various states. The last goal of the work is the evaluation of fracture surfaces of samples after tensile test.
Kolekce
- Bakalářské práce - 12132 [148]