Konzolové schodiště z betonu vyztuženého textilní výztuží - návrh a experimentální ověření
Cantilever staircase made of textile reinforced concrete - design and experimental verification
Typ dokumentu
diplomová prácemaster thesis
Autor
Jakub Hájek
Vedoucí práce
Vlach Tomáš
Oponent práce
Reiterman Pavel
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra konstrukcí pozemních stavebPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
U konstrukcí z betonu vyztuženým technickými textiliemi lze dosáhnout minimálních tlouštěk prvků, což vede k atraktivnosti konstrukce. Tato práce se konkrétně zaměřuje na použití betonu vyztuženým technickými textiliemi (Textile-reinforced concrete) u konzolových schodišť, kde je cílem navrhnout subtilní a architektonicky zajímavé schodiště, které by se snadno realizovalo z jednotlivých prefabrikátů. Výhodou TRC je kombinace nekorodující výztuže a jemnozrnného betonu, díky čemuž lze dosáhnout minimálních tlouštěk, kterých by nebylo možné dosáhnout s tradičními betony a ocelovou výztuží z důvodu požadavků norem na konstrukční zásady. Práce se zabývá návrhem konzolového schodiště z pohledu stavebně technického, statického a estetického. Byla experimentálně ověřena únosnost vyztužení stupňů se zaměřením na spolupůsobení jednotlivých prefabrikátů. Structures made of textile-reinforced concrete can reach minimal dimensions which results in attractiveness. This thesis focuses on the usage of textile-reinforced concrete with cantilever staircases. The goal is to design a subtle and architecturally interesting staircase which would be easily build from prefabricated parts. The advantage of TRC is the combination of non-corrosive reinforcement and fine-grained concrete which results in minimal dimensions which would not be possible with normal concrete and steel reinforcement due to requirements of standards on designing. The work is focused on the design of cantilever staircase from the structural, technical, static, and aesthetic view. The load bearing properties were experimentally tested with the focus on the interaction between the prefabricated parts.
Kolekce
- Diplomové práce - 11124 [671]