Posouzení požární odolnosti železobetonových desek pomocí různých výpočetních metod
Fire resistance assessment of reinforced concrete slabs using different calculation methods
Typ dokumentu
diplomová prácemaster thesis
Autor
Veronika Pražáková
Vedoucí práce
Štefan Radek
Oponent práce
Pařízek Šimon
Studijní obor
Integrální bezpečnost stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra betonových a zděných konstrukcíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tato práce se zabývá modelováním 1D přestupu tepla v konstrukci a posouzením konstrukce z hlediska požární odolnosti. Popisuje důležitá vstupní data pro modelování – např. nominální teplotní křivky, parametrickou křivku a vlastnosti materiálů. Také porovnává dostupné programy a ukazuje jednotlivé kódy z programování v prostředí Python. V rámci této práce byl vytvořen kód, který pomocí metody konečných diferencí stanovuje rozložení teploty v železobetonové konstrukci a také kód, který pomocí proužkové metody zpřesňuje výpočty momentu únosnosti a posuzuje únosnost prvku za požární situace. This work deals with the modelling of 1D heat transport in structure and assessment of the structure in terms of fire resistance. It describes important input data for modelling such as: temperature curves, parametric curve and material properties. It also compares available programs and shows the individual codes at modelling in Python. Within this work, a code was created that uses the finite difference method to determine the temperature distribution in a reinforced concrete structure, as well as a code that uses the strip method performing the calculations of load-bearing moments and evaluate the load-bearing capacity of the element in a fire situation.
Kolekce
- Diplomové práce - 11133 [459]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Self-navigation of laser beams on injected IFE targets using SBS PCM technology: conceptual design of the method
Autor: Slezák Ondřej; Vedoucí práce: Kálal Milan; Oponent práce: Straka Petr
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2012-09-26)Self-navigation of laser beams on IFE targets using SBS PCM -
Method for measuring lens distortion
Autor: Řezníček Jan; Vedoucí práce: Pavelka Karel; Oponent práce: Mikš Antonín
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2014-06-27)A new method for measuring glass lens distortion based on using distortion-free pinhole lens is proposed, where the measure of the distortion progress is derived by comparing two images of the calibration field given by ... -
Comparative static analysis of tunnelling methods NATM and ADECO-RS
Autor: Černá Vydrová Linda; Vedoucí práce: Barták Jiří; Oponent práce: Šejnoha Michal
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2014-06-27)New Austrian Tunnelling Method (NATM) has been used almost exlusively in the Czech Republic in the last three decades. This method has many supporters, whose resistance to new methods and approaches prevents the integration ...