FORESAIL-2 AOCS obchodní studie a návrh
FORESAIL-2 AOCS trade studies and design
Typ dokumentu
diplomová prácemaster thesis
Autor
Guillaume Le Bonhomme
Vedoucí práce
Slavinskis Andris
Oponent práce
Enmark Anita
Studijní obor
Kybernetika a robotikaStudijní program
Kybernetika a robotikaInstituce přidělující hodnost
katedra řídicí technikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Cílem práce je zkonstruovat spolehlivou platformu CubeSat, která odolá vysoké radiaci, pro mise trvající alespoň 6 měsíců. Analýza Attitude and OrbitControl System (AOCS) FORESAIL 2 se sousředila na akční členy a jejich schopnost vygenerovat dostatečný moment. Další analýzy se soustředily na schopnost generování výkonu a pohlcení radiace. Mise je v souladu s European Cooperation for Space Standard-ization (ECSS) a International Organization for Standardization (ISO). Aby součásti satelitu vydržely limit 10krad/s, bude nutné vybavit satelit 7mm ochranným pláštěm. Analýza senzorů a aktuátorů ukázala, že pouze tryskový pohon je schopen vygenerovat dostatečný moment. Jako senzory byly navrženy sluneční senzory, magnetometry, GPS a IMU senzory). Magnetorquery jsou vzhledem k nedostatečnému magnetickému poli nepoužitelné k řízení polohy, využít lze pouze reakčních kol. This work aims to design a reliable platform CubeSat, which can withstand high radiation, for a mission lasting at least six months. The Attitude and OrbitControl System (AOCS) analysis of FORESAIL 2 focused on the actuators and their ability to generate sufficient torque. Further analyzes concentrate on the ability to create power and absorb radiation. The mission is in line with the European Cooperation for Space Standardization (ECSS) and the International Organization for Standardization (ISO). For the satellite components to withstand the 10krad / s limit, it will be necessary to equip the satellite with a 7mm protective jacket. Analysis of the sensors and actuators showed that only the jet drive could generate sufficient torque. Solar sensors, magnetometers, GPS, and IMU sensors have been designed as sensors). Due to the insufficient magnetic field, magnetometers are unusable for position control, and only reaction wheels can be used.
Kolekce
- Diplomové práce - 13135 [328]