Výzkum vlivu parametru 'hatch distance' na kvalitu 3D kovového výtisku
The research of parameters hatch distance in 3D metal print technology quality
dc.contributor.advisor | Herman Aleš | |
dc.contributor.author | Bürgerová Karla | |
dc.date.accessioned | 2019-02-20T11:01:55Z | |
dc.date.available | 2019-02-20T11:01:55Z | |
dc.date.issued | 2018-09-07 | |
dc.identifier | KOS-784822654305 | |
dc.identifier.uri | http://hdl.handle.net/10467/80499 | |
dc.description.abstract | Předmětem této diplomové práce je výzkum vlivu parametru ,,hatch distance" na kvalitu 3D kovového výtisku. Díly jsou zhotovené z martenzitické oceli (1.2709) pro práci za tepla a jsou vyrobené aditivní technologií laserového spékání kovového prášku DMLS. U zvolených vzorků jsou vyhodnocovány pevnostní vlastnosti martenzitické oceli, porezita materiálu a vliv parametru ,,hatch distance" na výsledné vlastnosti dílů, které jsou stavěny v různých polohách. Cílem práce je porovnání naměřených hodnot ze zkoušek s hodnotami teoretickými. Podle metalografických a mechanických zkoušek je zřejmé, že nejdůležitějším faktorem je vzdálenost šrafování mezi jednotlivými body laseru (,,hatch distance") a správně zvolený skenovací vzor z důvodu dobrého překrytí polí a snížení výskytu porezity. | cze |
dc.description.abstract | The subject of this thesis is to research the influence of parameter ,, hatch distance "to the quality of the 3D metallic print. The parts are made from hot-rolled martensitic steel (1.2709) and are manufactured with the additive technology of laser bonding of metallic powder DMLS. The selected samples evaluate the strength properties of martensitic steel, the material porosity and the effect of the hatch distance parameter on the resulting properties of the parts that are built in different positions. The aim of the thesis is to compare measured values from tests with theoretical values. According metallographic and mechanical tests, it is clear that the most important factor is the distance between the points a hatch laser (Hatch ,, distance "), and the correctly selected scan pattern because of the good overlapping fields and reduce the incidence of porosity. | eng |
dc.language.iso | CZE | |
dc.publisher | České vysoké učení technické v Praze. Vypočetní a informační centrum. | cze |
dc.publisher | Czech Technical University in Prague. Computing and Information Centre. | eng |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html | eng |
dc.rights | Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html | cze |
dc.subject | 3D tisk,martenzitická ocel,materiálové zkoušky,simulace | cze |
dc.subject | 3D print,martensitic steel,material tests,simulation | eng |
dc.title | Výzkum vlivu parametru 'hatch distance' na kvalitu 3D kovového výtisku | cze |
dc.title | The research of parameters hatch distance in 3D metal print technology quality | eng |
dc.type | diplomová práce | cze |
dc.type | master thesis | eng |
dc.date.accepted | 2018-09-12 | |
dc.contributor.referee | Zikmund Petr | |
theses.degree.discipline | Výrobní a materiálové inženýrství | cze |
theses.degree.grantor | ústav strojírenské technologie | cze |
theses.degree.programme | Strojní inženýrství | cze |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
-
Diplomové práce - 12133 [218]