Návrh a vývoj odlehčovací ortézy nohy
Design and Development of a Foot Unloading Orthosis
Typ dokumentu
diplomová prácemaster thesis
Autor
Perkins Braden
Vedoucí práce
Postema Klaas
Oponent práce
Stará Marie
Studijní obor
Biomedicínské inženýrstvíStudijní program
Biomedicínská a klinická technika (studium v angličtině)Instituce přidělující hodnost
katedra biomedicínské technikyObhájeno
2017-09-19Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Patients who suffer from Charcot foot should not load the effected foot for approximately 8- Patients who suffer from Charcot foot should not load the effected foot for approximately 812 weeks. The current orthosis at Dr. Soetomo Hospital does not provide efficient unloading of the foot, thus, the aim of the project is to design a solution that efficiently unloads the foot of their Charcot foot patients. This project yields a final solution that uses hydrostatic compression and the conical shape of the leg to bear the weight of the user. Calculations are conducted to assess the validity of the design. For users between 50 ? 250kg the compressive stress required to brace the leg without slippage is calculated to be 34.1 ? 117.1kPa. The shear stress between the leg and the corset is calculated to be 6.2 ? 51.5kPa. These stresses are below the values measured on trans-tibial prosthetic socket users. A visual prototype is created and tested on two users to observe their response to donning and doffing. Each user showed a capability of donning and doffing the brace by themselves, and the corset accounted for the volume difference between the legs of the two users. The final design weighs 0.64kg and can be manufactured for an estimated 166.21euro. The final product theoretically achieves the aims of the project, however, a functional prototype is recommended in order to test its validity.
Kolekce
- Diplomové práce - 17110 [1011]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Ideový návrh aktivní kolenní ortézy pro podporu chůze a stability
Autor: Hanousek Jiří; Vedoucí práce: Jiřina Marcel; Oponent práce: Funda Tomáš
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2012-07-24) -
Léčení varozity a valgozity pomocí ortéz
Autor: Lesňák Tomáš; Vedoucí práce: Čulík Jan; Oponent práce: Jíra Aleš
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2006-06-09)Práce je zaměřena na výpočty napětí v růstových zónách kostí a stanovení deformace zůsobené protažením vazů. -
Léčení varozity a valgozity pomocí ortéz
Autor: Lesňák Tomáš; Vedoucí práce: Čulík Jan; Oponent práce: Jíra Aleš
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2008-06-06)Varozita a valgozita je vada pohybového aparátu dolních končetin. Je léčena konzervativním způsobem korekčními ortézami. Silový účinek od ortézy ovlivňuje růst kosti v růstových oblastech (modelace růstu). Byla popsána ...