Show simple item record

dc.contributor.authorBarto, Seba
dc.contributor.authorMach, Pavel
dc.date.accessioned2012-08-03T08:53:25Z
dc.date.available2012-08-03T08:53:25Z
dc.date.issued2010-05
dc.identifier.citationBarto, S. - Mach, P. Tolerance Design of Curing Process of Electrically Conductive Adhesives. In: 33rd International Spring Seminar on Electronics Technology. New York: IEEE, 2010, p. 103-106. ISBN 978-1-4244-7849-1.cze
dc.identifier.urihttp://hdl.handle.net/10467/12415
dc.description.abstractThe work was directed at examination of influence of tolerances of curing process parameters on the tolerances of the resistance and nonlinearity of a current vs. voltage characteristic of adhesive joints. The joints were formed of electrically conductive adhesive with isotropic electrical conductivity of an epoxy type filled with silver flakes. Mathematical models for the resistance and nonlinearity were found using factorial experiments of the type 22. Tolerance design was carried out for these models. It was found that tolerances of the resistance and nonlinearity depend more on the time of curing than on the curing temperature.eng
dc.language.isocescze
dc.publisherIEEEcze
dc.rights© 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.eng
dc.titleTolerance Design of Curing Process of Electrically Conductive Adhesivescze
dc.typepříspěvek z konference - elektronickýcze
dc.identifier.doi10.1109/ISSE.2010.5547265


Files in this item



This item appears in the following Collection(s)

Show simple item record