Konstrukční návrh administrativní budovy Argentinská
Structural Desing of Argentinská Office Building
Typ dokumentu
diplomová prácemaster thesis
Autor
Tomáš Dufek
Vedoucí práce
Frantová Michaela
Oponent práce
Schwarz Marek
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra betonových a zděných konstrukcíObhájeno
2024-02-15Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Cílem diplomové práce bylo konstrukční řešení administrativní budovy v Argentinské ulici na Praze 7- Holešovice. Práce se zabývá statickým řešení včetně návrhu založení objektu. Nejdříve byl vytvořen globální model celé konstrukce, na základě, kterého byly upraveny a optimalizovány vstupní podklady. Úpravy se týkaly především polohy nosných stěn ve 2. podzemním podlaží a desky 2. nadzemního podlaží, kde na sebe nenavazují svislé nosné konstrukce nad a pod deskou. Z důvodu dodržení architektonicky výrazného prvku tří šikmých sloupů, které podpírají desku 2. nadzemního podlaží mimo rastr sloupů zbylých pěti nadzemních podlaží, byla tato stropní deska doplněna dodatečně předpjatým nosníkem, který zajistí přenos zatížení z horních pater. Z důvodu pažení stavební jámy milánskou stěnou došlo také k úpravám tloušťky suterénních stěn. Všechny výsledky byly následně ověřeny za pomocí patrových výseků konstrukce. Výstupem práce je tedy návrh a ověření dimenze vybraných prvků, předběžný výpočet založení objektu, výkresy tvarů a rozbor statického výpočtu s komentářem k jednotlivým krokům výpočtu. The masters’s thesis’s goal is the structural design of administrative building in Argentinská Street in Prague 7 - Holešovice. The work deals with the static solution, including the design of the foundation of the building. First, a global model of the entire structure was created, based on which the input documents were modified and optimized. The modifications mainly concerned the position of the load-bearing walls in the 2nd underground floor and the slab of the 2nd above-ground floor, where the vertical load-bearing structures above and below the slab do not connect to each other. In order to maintain the architecturally significant element of three inclined columns that support the slab of the 2nd above-ground floor outside the column grid of the remaining five above-ground floors, this ceiling slab was supplemented with an additional pre-stressed beam to ensure the transfer of loads from the upper floors. The thickness of the basement walls was also adjusted due to the construction pit being flanked by the Milanese wall. All results were subsequently verified using floor sections of the structure. The output of the work is therefore the design and verification of the dimensions of the selected elements, preliminary calculation of the foundation of the object, formwork drawings and analysis of the static calculation with a comment on the individual steps of the calculation.
Kolekce
- Diplomové práce - 11133 [459]