Konstrukční řešení bytového domu Štěrboholy
Structural design of a dweling house Štěrboholy
Type of document
bakalářská prácebachelor thesis
Author
David Jeník
Supervisor
Broukalová Iva
Opponent
Košatka Pavel
Field of study
Konstrukce pozemních stavebStudy program
Stavební inženýrstvíInstitutions assigning rank
katedra betonových a zděných konstrukcíDefended
2023-06-27Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Cílem této bakalářské práce je zpracování statické části projektové dokumentace na výstavbu bytového domu v Praze – Hostivaři. Bakalářská práce je členěna do jednotlivých částí, kdy v první části se nachází technická zpráva a zadání práce, další části jsou věnovány předběžnému statickému výpočtu jednotlivých prvků konstrukce, podrobnému statickému návrhu schodiště a podrobnému statickému návrhu stropní konstrukce 2.NP. Technická zpráva a zadání práce obsahuje základní informace o projektu, jeho konstrukčním a materiálovém řešení, uvažovaném zatížení a způsobu jeho založení. Součástí je i výkresová část zadání práce, která slouží jako podklad pro zpracování. Předběžný statický výpočet je věnován návrhu konkrétního konstrukčního řešení stavby a předběžnému výpočtu velikosti jednotlivých zatížení a prvků – stěny, stropní desky, vykonzolované části objektu a základovým konstrukcím. Součástí jsou také výkresy tvaru jednotlivých podlaží. Následující část projektové dokumentace je věnována návrhu schodiště. Je navrženo prefabrikované schodišťové rameno, které bude přes ozub, za pomoci akustických prvků uloženo na stropní konstrukci a mezipodestu, jejíž návrh vyztužení je součástí. Dále je zde věnována pozornost způsobu transportu prefabrikovaného železobetonového dílce, což je řešeno za pomoci transportních kotev firmy Halfen a jejichž návrh je součástí. K návrhu transportních kotev bylo využito softwaru firmy Halfen – TPA. Součástí jsou výkresy tvaru a vyztužení mezipodesty a schodišťového ramene. Poslední část projektové dokumentace se věnuje návrhu stropní konstrukce 2.NP, která je atypická oproti ostatním stropním konstrukcím svým přitížením od ustupujícího 3.NP, kdy nám v poli vzniká značný moment. Vyztužení stropní desky je na základě vypočtených maximálních ohybových momentů. Pro výpočet obálky momentů byl využit software Scia Engineer 21.1. Stropní deska je vypočtena z hlediska mezního stavu únosnosti a mezního stavu použitelnosti a je řešena, jako obousměrně pnutá monolitická železobetonová deska. Součástí jsou výkresy výztuže při dolní a horním povrchu desky. The aim of this bachelor's thesis is to process the static part of the project documentation for the construction of an apartment building in Prague - Hostivař. The bachelor's thesis is divided into several parts, with the first part containing the technical report and the assignment of the thesis. The subsequent parts are dedicated to the preliminary static calculation of individual structural elements, detailed static design of the staircase, and detailed static design of the ceiling structure on the 2nd floor. The technical report and the assignment of the thesis contain basic information about the project, its structural and material solutions, the assumed loads, and the method of its foundation. It also includes a drawing section of the thesis assignment, which serves as a basis for processing. The preliminary static calculation is dedicated to the design of the specific structural solution of the building and the preliminary calculation of the size of individual loads and elements - walls, ceiling slabs, cantilevered parts of the structure, and foundation structures. It also includes drawings of the floor plan of each level. The third part of the project documentation is dedicated to the design of the staircase. It proposes a prefabricated stair arm, which will be supported on the ceiling structure and intermediate landing through a toothed joint and acoustic elements. The design of the reinforcement for the intermediate landing is also included. Attention is also given to the method of transporting the prefabricated reinforced concrete element, which is solved using transport anchors from Halfen, whose design is part of the documentation. The design of the transport anchors was done using the software provided by Halfen - TPA. Drawings of the shape and reinforcement of the intermediate landing and stair arm are included. The last part of the project documentation focuses on the design of the ceiling structure on the 2nd floor, which is unique compared to other ceiling structures due to the additional load from the recessed 3rd floor, resulting in a significant moment in the field. The reinforcement of the ceiling slab is based on the calculated maximum bending moments. The software Scia Engineer 21.1 was used to calculate the moment envelope. The ceiling slab is designed for ultimate limit state and serviceability limit state and is treated as a two-way spanning monolithic reinforced concrete slab. Drawings of the reinforcement at the lower and upper surfaces of the slab are included.
Collections
- Bakalářské práce - 11133 [584]