Lateral torsional buckling of perforated cold formed channel sections
Lateral torsional buckling of perforated cold formed channel sections
Typ dokumentu
diplomová prácemaster thesis
Autor
Alina Markova
Vedoucí práce
Jandera Michal
Oponent práce
Kolda Martin
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra ocelových a dřevěných konstrukcíObhájeno
2023-02-16Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
The presented master’s thesis deals with the lateral torsional buckling of perforated cold formed channel sections. The final work contains four parts — overview of lateral torsional buckling, cold-formed channel sections and calculations of this channels; laboratory experiments; finite element simulation and conclusion. The aim of the thesis is to investigate the behaviour of channel MT-60. The part with laboratory experiments includes static bending test and tensile test for MT-60. The part with finite element simulation deals with the model of MT-60, which is corresponds to experiment. Furthermore, the conclusion part has a condition, when it may be ignored to calculate with lateral torsional buckling effects. The presented master’s thesis deals with the lateral torsional buckling of perforated cold formed channel sections. The final work contains four parts — overview of lateral torsional buckling, cold-formed channel sections and calculations of this channels; laboratory experiments; finite element simulation and conclusion. The aim of the thesis is to investigate the behaviour of channel MT-60. The part with laboratory experiments includes static bending test and tensile test for MT-60. The part with finite element simulation deals with the model of MT-60, which is corresponds to experiment. Furthermore, the conclusion part has a condition, when it may be ignored to calculate with lateral torsional buckling effects.
Kolekce
- Diplomové práce - 11134 [610]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Určování polohy pomocí vícecestného šíření s využitím strojového učení
Autor: Rostislav Karásek; Vedoucí práce: Pechač Pavel; Oponent práce: Prokeš Aleš
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2022-09-06)Vícecestné šíření rádiového signálu bývalo považováno za problém pro určování polohy, který bylo nutné potlačit. Avšak převratný nový přístup určování polohy s využitím vícecestného šíření způsobil posun paradigmatu, kdy ... -
A Comprehensive Survey on the Non-Invasive Passive Side-Channel Analysis
Autor: Socha P.; Miškovský V.; Novotný M.
(Multidisciplinary Digital Publishing Institute (MDPI AG), 2022)Side-channel analysis has become a widely recognized threat to the security of cryptographic implementations. Different side-channel attacks, as well as countermeasures, have been proposed in the literature. Such attacks ... -
Studie záplavového území města Český Těšín na řece Olši
Autor: Šarmanová Alena; Vedoucí práce: Havlík Aleš; Oponent práce: Tureček Břetislav
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2016-05-20)Práce se zabývá stanovením rozsahu záplavového území na základě výpočtu průběhu hladin povodňových průtoků. Výpočet je proveden za pomoci jednorozměrného modelu proudění vytvořeného v programu HEC-RAS. Část práce je věnována ...