Optimalizace nosného systému železobetonové haly
Optimization of the structural system of a reinforced concrete storage hall
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Valeriia Kazmina
Vedoucí práce
Štefan Radek
Oponent práce
Holan Jakub
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra betonových a zděných konstrukcíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Bakalářská práce obsahuje statický návrh, posouzení a optimalizace nosných prvků skladovací prefabrikované haly. V první části je proveden statický návrh a posouzení vazníku, průvlaku a sloupu. U vazníku a průvlaku nejdřív probíhá ruční návrh průřezových rozměrů a jejích ověření. Po stanovení vnitřních sil je navržena výztuž, která je následně posouzena. Předmětem bakalářské práce je i návrh ozubu pro uložení vazníku. U sloupu jsou průřezové rozměry nejprve odhadnuty a následně ověřeny. U sloupu je dále ověřena štíhlost, stanovena geometrická imperfekce a imperfekce od účinku momentu druhého řádu. Výztuž sloupu je navržena pomocí dostředného tlaku a konstrukčních zásad. Průřez sloupu je ručně posouzen pomocí interakčního diagramu na účinky kombinace normálové síly a momentu včetně účinků druhého řádu. Průřez sloupu je dále posouzen pomocí grafu Moment – křivost. U každého nosného prvku jsou navrženy manipulační úchyty pro transport. Pro všechny nosné prvky je vypočítán objem betonu, hmotnost oceli a cena použitého betonu a oceli. Následně je stanovena celková cena z hlediska materiálů použitých na nosné konstrukce. Ve druhé části práce je popsána optimalizace nosného systému haly.Optimalizace byla provedena pomocí programu vytvořeného autorkou práce. Výstupem z programu jsou grafy, které popisují vývoj rozměrů, hmotností a cen jednotlivých prvků a celé konstrukce v závislosti na rozteči mezi sloupy. Z výstupů je nalezena optimální kombinace délek a průřezových rozměrů vazníků a průvlaků v závislosti z hlediska ceny konstrukce. Na konci práce jsou přiloženy výkresy výztuže vazníku včetně ozubu, průvlaku a sloupu pro variantu navrženou ručně a pro nejoptimálnější variantu stanovenou pomocí programu. The bachelor thesis contains structural design, assessment and optimalization of load bearing elements of a precast storage hall. In the first part, a structural design and assessment of the truss, beam and column is performed. For trusses and beams, the cross-sectional dimensions are designed and checked by hand. After determining the internal forces, the reinforcement is designed, which is then assessed. The subject of the bachelor thesis is also the design of a dapped-end for placing a truss. For the column, the cross-sectional dimensions are first estimated and then verified. A slenderness of the column is verified, the geometric imperfection and the imperfection from the effect of second order moment are determined. The reinforcement of column is designed by using axial compression and construction principles. The cross-section of the column is manually assessed by using an interaction diagram for the effects of a combination of normal force and moment, including second order effects. The cross-section of the column is further assessed using a Moment – curvature graph. Transport anchors are designed for each element. For all load bearing elements, the volume of concrete, the weight of the steel and the price of the concrete and steel used are calculated. Subsequently, the total price is determined in terms of the materials used on the structure. The second part of the thesis describes the optimalization of the load bearing system of the hall. The optimalization was calculated by using a software created by the author of the work. The outputs of the software are graphs describing the development of dimensions, weight and price of individual elements and the entire structure depending on the spacing between the columns. The optimal combination of lengths and cross-sectional dimensions of trusses and beams could be found from the outputs, depending on the price of the structure. At the very end of the paper, drawings of the truss reinforcement are attached, including the dapped-end, the beam and the column for the variant designed manually and for the most optimal variant determined by the software.
Kolekce
- Bakalářské práce - 11133 [560]