Stanovení požadavků na geometrickou přesnost železobetonových konstrukcí z pohledu návaznosti na osazení výplní otvorů
Determination of requirements for geometric accuracy of concrete structures from the point of view of connection to the construction openings for windows and external doors
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Petr Zavadil
Vedoucí práce
Veselá Linda
Oponent práce
Synek Jaroslav
Studijní obor
Příprava, realizace a provoz stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra technologie stavebPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Bakalářská práce se zabývá stanovením požadavků a analýzou geometrické přesnosti železobetonových konstrukcí z pohledu návaznosti na osazení výplní otvorů. V teoretické části se autor zabývá legislativními a normovými požadavky z oblasti geometrické přesnosti obecně. Následuje rozbor v oblasti geometrické přesnosti železobetonových konstrukcí a otvorů v nich, jak z pohledu českých technických norem, tak z pohledu německých a britských norem. Praktická část spočívá v analýze vybraných projektů z hlediska smluvních požadavků na geometrickou přesnost betonových konstrukcí a otvorů pro okna a dveře. Praktickou část zakončuje návrh postupu řešení kontrol geometrické přesnosti této problematiky. The bachelor's thesis deals with setting the requirements and analysis of the geometric accuracy of reinforced concrete structures from the point of view of to the construction openings for windows and external doors. In the theoretical part, the author deals with legislative and standard requirements in the field of geometric accuracy in general. The following is an analysis of the geometric accuracy of reinforced concrete structures and openings in them, both from the point of view of Czech technical standards so from the point of view of German and British standards. The practical part consists of the analysis of selected projects in terms of contractual requirements for the geometric accuracy of concrete structures and openings for windows and doors. The practical part concludes with a design for the solution of geometric accuracy checks of this issue.
Kolekce
- Bakalářské práce - 11122 [649]