Vyhodnocení přípustnosti vad odporových bodových svarů pomocí termografického měření
Evaluation of defects admissibility of resistance spot welds using thermographic measurements
Type of document
diplomová prácemaster thesis
Author
Pavel Mach
Supervisor
Kolařík Ladislav
Opponent
Kovář Jan
Field of study
Výrobní a materiálové inženýrstvíStudy program
Strojní inženýrstvíInstitutions assigning rank
ústav strojírenské technologieRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Diplomová práce se zabývá vyhodnocením přípustnosti vad odporových bodových svarů pomocí radiometrického měření pro ověření možnosti, je-li vyhodnocování tohoto svařovacího procesu pomocí tzv. online termografie proveditelné. Práce je rozdělena do dvou částí. První část (teoretická) obsahuje stručný úvod do problematiky bezdotykového měření teploty, od fyzikálních principů po teoretické základy a využití této metody v praxi, dále teoretická část práce obsahuje stručný popis principu metody odporového bodového svařování. Druhá část (praktická) se zabývá samotným experimentem, obsahuje popis použitých zařízení, technologických metod a celkový rozbor postupného provedení experimentu. Závěr práce tvoří diskuze získaných výsledků a zjištěných doporučení. The diploma thesis deals with the evaluation of the tolerance of resistance spot welds using radiometric measurements to verify the possibility of evaluating this welding process using online thermography feasible. The thesis is divided into two parts. The first part (theoretical) contains a brief introduction to the issue of non-contact temperature measurement, from physical principles to theoretical foundations and the use of this method in practice. The theoretical part also contains a brief description of the principle of resistance spot welding. The second part (practical) deals with the experiment itself, contains a description of the equipment used, technological methods and an overall analysis of the progressive implementation of the experiment. The conclusion of the thesis consists of a discussion of the results and the recommendations.
Collections
- Diplomové práce - 12133 [236]