Zobrazit minimální záznam

CHaracterization of hydration processes of cement pastes by means of thermal analysis



dc.contributor.advisorTrník Anton
dc.contributor.authorScheinherrová Lenka
dc.date.accessioned2019-01-16T09:41:13Z
dc.date.available2019-01-16T09:41:13Z
dc.date.issued2018-12-07
dc.identifierKOS-538872555805
dc.identifier.urihttp://hdl.handle.net/10467/79211
dc.description.abstractI přesto, že existuje velké množství odborných studií, které se zabývají mechanismy hydratace cementu, většina z nich omezuje své pozorování pouze na krátký časový interval. Pro správné pochopení hydratačních procesů je nutné co nejvíce rozšířit tento studovaný úsek. Z tohoto důvodu se tato práce zabývá studiem průběhu hydratace cementových past v závislosti na čase až do 360 dní. Za tímto účelem byly navrženy cementové pasty s různým vodním součinitelem 0.3–0.5. Dále byly připraveny pasty s pucolánově aktivními příměsmi. Cement byl v těchto pastách částečně nahrazen mikrosilikou v rozmezí 0–12 %. Druhým studovaným pucolánem byl zvolen přírodní zeolit, kterým bylo nahrazeno 0–40 % cementu. Dále byl sledován vliv způsobu uložení vzorků (voda/vzduch) na tvorbu a změnu hydratačních produktů. Hlavní metodou byla zvolena termická analýza. Jedná se o metodu, která je využitelná v jakémkoliv stáří materiálu. Především pomocí termogravimetrie je možné kvantitativně určit zastoupení hlavních hydratačních produktů. Dále byl podrobněji sledován průběh hydratačního tepla, vývoj mikrostruktury, základní fyzikální vlastnosti a mechanické vlastnosti studovaných cementových past.cze
dc.description.abstractDespite the variety of studies dealing with the mechanisms of cement hydration, their observation is usually limited only to short-term intervals. While often neglected, the study of the long-term processes is also essential to fully understand the complex hydration mechanisms. This thesis attempts to extend the limited knowledge in this area through the study of the hydration processes of various cement pastes within a full year. For this purpose, plain cement pastes with various water-to-cement ratios ratios between 0.3 and 0.5 were prepared, along with pastes containing pozzolana active materials. In these blended pastes, cement was partially replaced by silica fume by 0–12wt.%. The second chosen pozzolan was natural zeolite, which replaced between 0 and 40 wt.% of the cement. The effect of the sample storage (water vs. air) was also examined. Thermal analysis was selected as the main method, as its performance is not limited by the age of the materials. More precisely, thermogravimetry can quantify the main hydration products and their changes in time. Moreover, the hydration heat development, microstructure evolution, basic physical and mechanical properties of the studied cement pastes were determined.eng
dc.language.isoENG
dc.publisherČeské vysoké učení technické v Praze. Vypočetní a informační centrum.cze
dc.publisherCzech Technical University in Prague. Computing and Information Centre.eng
dc.rightsA university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmleng
dc.rightsVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.htmlcze
dc.subjectHydratace cementu,termická analýza,cementové pasty,pucolán,časová závislostcze
dc.subjectHydration of cement,thermal analysis,cement pastes,pozzolan,time dependencyeng
dc.titleCharakterizace hydratačních procesů cementových past pomocí termické analýzycze
dc.titleCHaracterization of hydration processes of cement pastes by means of thermal analysiseng
dc.typedisertační prácecze
dc.typedoctoral thesiseng
dc.date.accepted2018-12-12
dc.contributor.refereeKonvalinka Petr
theses.degree.disciplineFyzikální a materiálové inženýrstvícze
theses.degree.grantorkatedra materiálového inženýrství a chemiecze
theses.degree.programmeStavební inženýrstvícze


Soubory tohoto záznamu





Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam