Posouzení konstrukčních systémů výrobní haly za účinku požáru
Construction systems assessment of manufacturing hall by fire analysis
dc.contributor.advisor | Velebil Lukáš | |
dc.contributor.author | Šejna Jakub | |
dc.date.accessioned | 2018-06-27T17:54:58Z | |
dc.date.available | 2018-06-27T17:54:58Z | |
dc.date.issued | 2018-06-27 | |
dc.identifier | KOS-593779703205 | |
dc.identifier.uri | http://hdl.handle.net/10467/78150 | |
dc.description.abstract | Tato bakalářská práce slouží jako dokázání komplexního zvládnutí výuky bakalářského studia na Fakultě Stavební Českého vysokého učení technického v Praze ve studijním programu Stavební inženýrství, studijní obor Požární bezpečnost staveb. Pro vypracování této bakalářské práce jsou využity všechny znalosti, kterých jsem jako student získal studiem Českého vysokého učení technického v Praze, odborných praxí, které jsem vykonával během studia a znalosti získané samostudiem, a to buď pomocí technických listů výrobců a jejich technických postupů při realizaci, ale i při absolvování odborných seminářů zejména v oblasti požární ochrany. Bakalářská práce je vypracována v souladu s předpisy platnými k datu odevzdání práce, samostatně, bez cizí pomoci, s výjimkou konzultací v rámci Českého vysokého učení technického v Praze. V rámci této bakalářské práce bude posouzení skutečného konstrukčního stavu výrobní haly Autogen Slatiňany, která je navržena jako ocelová hala se sloupy HEA a příhradovinami z trubkových profilů. Jako obvodové stěny jsou navrženy sendvičové panely KINGSPAN. Předmětem bakalářské práce je alternativní řešení materiálové varianty nosné konstrukce, kdy je původní ocelová konstrukce nahrazena dřevěnou konstrukcí. Práce zahrnuje možná konstrukční řešení z lepeného či rostlého dřeva. Na závěr bude porovnán výsledný návrh se skutečným stavem a posoudím výhody a nevýhody jednotlivých návrhů. | cze |
dc.description.abstract | This bachelor thesis serves as a comprehensive proof of mastering the teaching of a bachelor's study at the Faculty of Civil Engineering of the Czech Technical University in Prague in the study program Civil Engineering, study branch Fire Safety of Buildings. All the knowledge I obtained as a student through the study of the Czech Technical University in Prague, the professional practices that I did during my studies and the self-study knowledge were used for this bachelor thesis, either through the technical sheets of the manufacturers and their technical procedures in the implementation, but also during professional seminars, especially in the area of fire protection. The bachelor's thesis is elaborated in accordance with current regulations (valid as of 27. 5. 2018), independently, without foreign interventions, except for consultations within the Czech Technical University in Prague. In the framework of this bachelor thesis will be the assessment of the actual construction state of the production hall Autogen Slatiňany, which is designed as a steel hall with HEA columns and joinery beams. Outside walls are designed with KINGSPAN sendwichs panels. In this bachelor thesis I will deal with what happened if the hall was realized not from a steel structure but from a wooden structure. I will deal with possible design solutions from glued laminated timber and solid timber in different systems. Then compare the possibilities of the proposals with the actual situation and consider the advantages and disadvantages of individual proposals. | eng |
dc.language.iso | CZE | |
dc.publisher | České vysoké učení technické v Praze. Vypočetní a informační centrum. | cze |
dc.publisher | Czech Technical University in Prague. Computing and Information Centre. | eng |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html | eng |
dc.rights | Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html | cze |
dc.subject | Dřevo,Dřevěný Rám,Dřevěný rán se zakřivenou střednicí,Požárně bezpečnostní řešení stavby,Teplotní analýza požárního úseku | cze |
dc.subject | Timber,Timber frame,Timber arc frame,Fire protection of building,Fire analysis | eng |
dc.title | Posouzení konstrukčních systémů výrobní haly za účinku požáru | cze |
dc.title | Construction systems assessment of manufacturing hall by fire analysis | eng |
dc.type | bakalářská práce | cze |
dc.type | bachelor thesis | eng |
dc.date.accepted | 2018-06-27 | |
dc.contributor.referee | Cábová Kamila | |
theses.degree.discipline | Požární bezpečnost staveb | cze |
theses.degree.grantor | katedra ocelových a dřevěných konstrukcí | cze |
theses.degree.programme | Stavební inženýrství | cze |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
-
Bakalářské práce - 11134 [568]