Plazmové navařování kompozitu s kovovou matricí plněného neoxidickou keramikou
PTA deposition of metal matrix composite reinforced with non-oxide ceramic particles
Typ dokumentu
diplomová prácemaster thesis
Autor
Daniel-John Rowland
Vedoucí práce
Rohan Pavel
Oponent práce
Janata Marek
Studijní obor
Bez specializaceStudijní program
Výrobní inženýrstvíInstituce přidělující hodnost
ústav strojírenské technologiePráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Diplomová práce se zaměřuje na pulzní plazmové navařování kompozitu s kovovou matricí složeného z niklové superslitiny Inconel 625® a karbidu křemíku s cílem vytvořit návar, kde je karbid křemíku rovnoměrně rozložen v povlaku a který je metalurgicky spojen se základním materiálem. V teoretické části je zahrnutý popis PTA metody, charakteristiky karbidu křemíku, charakteristiky niklu, jeho slitin a popis, rozbor a analýza studií zahrnující podobné keramické kompozity. Experimentální část se zaměřuje na navaření povlaků tohoto typu. V průběhu procesu byl sledován teplotní průběh. Po vizuálním hodnocení byla analyzována mikrostruktura, chemické složení fází dle metody EDS a následně byla změřena mikrotvrdost. The thesis focuses on the pulsed plasma hardfacing of composites with metal matrix composed of Inconel 625® type nickel superalloy and silicon carbide. The aim is to create a coating where the silicon carbide is uniformly distributed, and metallurgically bonded to the base material. The theoretical section includes a description of the PTA method, the characteristics of silicon carbide, the characteristics of nickel, and a description, dissection and analysis of studies involving similar ceramic composites. The experimental part focuses on the hardfacing of ten coatings of this type. The temperature fluctuation was monitored during the process. After visual evaluation, the microstructure and chemical composition of the phases were analysed according to the EDS method and then the microhardness was measured.
Kolekce
- Diplomové práce - 12133 [236]