Administrativní budova
Office Building
Typ dokumentu
diplomová prácemaster thesis
Autor
Magdaléna Stolovská
Vedoucí práce
Kuklíková Anna
Oponent práce
Brandejs Radek
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra ocelových a dřevěných konstrukcíObhájeno
2023-02-17Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Cílem mé diplomové práce bylo zpracovat projektovou dokumentaci administrativní budovy. Administrativní budova má čtyři nadzemní a jedno podzemní podlaží. Podzemní podlaží je navrženo ze železobetonu, nadzemní podlaží tvoří dřevěná konstrukce. Dřevěná část je konstrukčně řešena jako těžký skelet s nosnými prvky z lepeného lamelového dřeva. Práce se skládá ze čtyř částí, kterými jsou technická zpráva, stavebně - technické řešení, statický výpočet a výkresová část. Stavebně - technické řešení se zabývá návrhem budovy z hlediska tepelné techniky. Statický výpočet se zabývá návrhem a posouzením nosných konstrukcí. Veškeré statické výpočty jsou provedeny podle platných norem ČSN EN. The aim of my diploma's thesis was to prepare project documentation for an office building. The office building has four floors above ground and one underground. The underground floor is made of reinforced concrete, all the upper floors consist of a timber structure. The wooden part is structurally designed as a heavy skeleton system with load-bearing elements made of glued laminated wood. The work consists of four parts, which are a technical report, construction-technical design, static calculation and drawings. The construction-technical design deals with the design of the building from the point of view of thermal technology. The static calculations deals with the design and assessment of load-bearing structures. All the static calculations are performed according to CSN EN standards.
Kolekce
- Diplomové práce - 11134 [610]