ČVUT DSpace
  • Prohledat DSpace
  • English
  • Přihlásit se
  • English
  • English
Zobrazit záznam 
  •   ČVUT DSpace
  • České vysoké učení technické v Praze
  • Publikační činnost ČVUT
  • Zobrazit záznam
  • České vysoké učení technické v Praze
  • Publikační činnost ČVUT
  • Zobrazit záznam
JavaScript is disabled for your browser. Some features of this site may not work without it.

On passive damping in machine tool hybrid structural parts

Typ dokumentu
článek v časopise
journal article
Peer-reviewed
publishedVersion
Autor
Kulíšek V.
Kolář P.
Vrba P.
Smolík J.
Janota M.
Růžička M.
Machálka M.



Práva
openAccess
Metadata
Zobrazit celý záznam
Abstrakt
Hybrid materials combining steel or cast iron with fibre or particle composites have a good potential for lightweight machine tool structural design with high damping ratio. These materials are analyzed in the paper with a focus on damping improvement of structural components and machine tool assemblies. Fibre composites and particle composites were selected as the lightweight elements for the hybrid machine tool structure. The fibre composites were designed as low-density, high stiffness-oriented reinforcements, which were bonded to build metal structural parts conventionally. The particle composites were applied as filler materials into the hollows of the metal structural parts. Both composite structures presented a possibility to reduce the mass of the component due to the reduction of wall thickness (fibre composite) or removal of heavy ribbing (particle composites) and to influence the parts' static and dynamic stiffness. Hybrid structures, combining the light-weight elements with cast iron or welded steel, were designed and tested in case studies using experimental modal analysis methods. Experimental modal analysis was used as the main approach for identification of the damping ratio on a basic coupon level, followed by testing of structural parts in a stand-alone configuration and ending with a structural part assemblies testing. Both particle composites and fibre composites were successful in improving the damping ratio of single structural parts. However, the damping ratio of the hybrid component mounted into an assembly configuration shows only less significant improvement. The presented results demonstrate importance of the damping caused in the connecting interfaces.
URI
http://hdl.handle.net/10467/94872
Zobrazit/otevřít
PUBLISHED ## OPEN (11.08Mb)
Kolekce
  • Publikační činnost ČVUT [1503]

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Kontaktujte nás | Vyjádření názoru
Theme by 
@mire NV
 

 

Užitečné odkazy

ČVUT v PrazeÚstřední knihovna ČVUTO digitální knihovně ČVUTInformační zdrojePodpora studiaPodpora publikování

Procházet

Vše v DSpaceKomunity a kolekceDle data publikováníAutořiNázvyKlíčová slovaTato kolekceDle data publikováníAutořiNázvyKlíčová slova

Můj účet

Přihlásit se

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Kontaktujte nás | Vyjádření názoru
Theme by 
@mire NV