Materiálové vlastnosti 3D tištěných vzorků
Material properties of 3D printed specimens
dc.contributor.advisor | Valenta Jakub | |
dc.contributor.author | Jan Krapf | |
dc.date.accessioned | 2022-06-23T22:52:29Z | |
dc.date.available | 2022-06-23T22:52:29Z | |
dc.date.issued | 2022-06-23 | |
dc.identifier | KOS-985498666505 | |
dc.identifier.uri | http://hdl.handle.net/10467/102920 | |
dc.description.abstract | Teoretická část práce má za cíl zpracovat rešerši dostupných tiskových technologii a materiálů a poté pomocí metody trade metrix vybrat perspektivní materiál a technologii. V praktické části budou vytvořeny 3D tištěné vzorky. Zhodnotíme, jaké kvality tisku se podařilo dosáhnout a podrobíme je tahové zkoušce. Následně je cílem zjistit, jaká je závislost poměru mezi hmotností a pevností na hustotě použitého infillu a zjistit, jaká je funkční závislosti. Během tahové zkoušky bylo zjištěno, že při vlastním tisku došlo k vnitřním vadám, které se výrazně podepsaly na výsledku tahové zkoušky. Podle získaných dat jsme došli k výsledku, že závislost poměru mezi hmotností a pevností na hustotě použitého infillu je konstantní. | cze |
dc.description.abstract | The theoretical part of the thesis aims to process a search of available printing technologies and materials and then use the trade metrix method to select promising material and technology. In the practical part 3D printed samples will be created. We will evaluate what print quality has been achieved and put them to the tensile test. Subsequently, the aim is to find out what is the dependence of the ratio between mass and strength on the density of the infill used and to find out what the functional dependence is. During the tensile test, it was found that during the actual printing there were internal defects that significantly affected the result of the tensile test. According to the obtained data, we came to the conclusion that the dependence of the ratio between mass and strength on the density of the infill used is constant. | eng |
dc.publisher | České vysoké učení technické v Praze. Vypočetní a informační centrum. | cze |
dc.publisher | Czech Technical University in Prague. Computing and Information Centre. | eng |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html | eng |
dc.rights | Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html | cze |
dc.subject | 3D tisk | cze |
dc.subject | mechanické vlastnosti | cze |
dc.subject | plast | cze |
dc.subject | tahová zkouška | cze |
dc.subject | ABS | cze |
dc.subject | PA | cze |
dc.subject | FDM tisk | cze |
dc.subject | 3D printing | eng |
dc.subject | mechanical properties | eng |
dc.subject | plastic | eng |
dc.subject | tensile test | eng |
dc.subject | ABS | eng |
dc.subject | PA | eng |
dc.subject | FDM Printing | eng |
dc.title | Materiálové vlastnosti 3D tištěných vzorků | cze |
dc.title | Material properties of 3D printed specimens | eng |
dc.type | bakalářská práce | cze |
dc.type | bachelor thesis | eng |
dc.contributor.referee | Brož František | |
theses.degree.discipline | Konstruování podporované počítačem | cze |
theses.degree.grantor | ústav letadlové techniky | cze |
theses.degree.programme | Strojírenství | cze |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
-
Bakalářské práce - 12122 [137]