NOVOTNÝ, L., et al. Design of Two-Axial Actuator for Controlled Vibration Damper for Large Rams. Actuators. 2021, 10(8), ISSN 2076-0825. DOI 10.3390/act10080199. Available from: https://www.mdpi.com/2076-0825/10/8/199
Machine tool rams are important constructional elements found on vertical lathes as well as on many other machines. In most cases, a machine tool ram constitutes an assembly with significant dynamic compliance that affects the machine’s ability to achieve stable cutting conditions. There are various solutions for increasing a machine tool ram’s stiffness and damping. This paper describes an innovative concept of a two-axial electromagnetic actuator for controlled vibration dampers with high dynamic force values. The described solution is purposefully based on the use of standard electric drives. As a result, the size of the actuator is easier to scale to the required application. The solution is designed as a spacer between the end of the ram and the head. The paper presents the actuator concept, construction design, current control loop solution and experimental verification of the controlled vibration damper’s function on the test ram in detail. The presented position measurement concept will enable the use of non-contact position sensors for motor commutation as well as for possible use in vibration suppression control. Applications can be expected mainly in the field of vibration suppression of vertical rams of large machine tools.
eng
dc.format.mimetype
application/pdf
dc.language.iso
eng
dc.publisher
MDPI AG
dc.relation.ispartof
Actuators
dc.subject
active vibration damper
eng
dc.subject
controlled vibration damper
eng
dc.subject
machine tool rams
eng
dc.subject
vibration damping
eng
dc.subject
actuator for vibration damping
eng
dc.title
Design of Two-Axial Actuator for Controlled Vibration Damper for Large Rams
Autor: Ondřej Pecka; Vedoucí práce: Lopot František; Oponent práce: Křička Jaroslav (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2021-09-01)
Cílem této práce je navrhnout nový vibrační vytloukací rošt pod vedením firmy Techkon s r.o. určený pro společnost Slévárna Kuřim a.s. Návrh má být proveden na základě zkušeností s provozem stávajícího zařízení a musí ...
Autor: Hanžl Ondřej; Vedoucí práce: Novotný Lukáš; Oponent práce: Šika Zbyněk (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2017-05-30)
Tato práce se zabývá návrhem zařízení pro potlačení vibrací laboratorního nosníku na jeho první vlastní frekvenci. Za tímto účelem byla zpracována rešerše na metody potlačování vibrací se zaměřením na pasivní způsoby ...
Autor: Lukáš Bartoška; Vedoucí práce: Mádl Jan; Oponent práce: Ulrych Antonín (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-08-28)
V této práci je přiblížena problematika kmitání při obrábění způsobeného budící sílou. Vysvětleny jsou dopady tohoto kmitání na proces obrábění a možnosti jeho odstranění. Dále se práce zabývá možnostmi měření kmitání a ...