Electrical and Self-Sensing Properties of Alkali-Activated Slag Composite with Graphite Filler
dc.contributor.author | Rovnaník P. | |
dc.contributor.author | Kusák I. | |
dc.contributor.author | Bayer P. | |
dc.contributor.author | Schmid P. | |
dc.contributor.author | Fiala L. | |
dc.date.accessioned | 2020-01-28T12:23:30Z | |
dc.date.available | 2020-01-28T12:23:30Z | |
dc.date.issued | 2019 | |
dc.identifier | V3S-331370 | |
dc.identifier.citation | ROVNANÍK, P., et al. Electrical and Self-Sensing Properties of Alkali-Activated Slag Composite with Graphite Filler. Materials. 2019, 12(10), ISSN 1996-1944. DOI 10.3390/ma12101616. Available from: https://www.mdpi.com/1996-1944/12/10/1616 | |
dc.identifier.issn | 1996-1944 (online) | |
dc.identifier.uri | http://hdl.handle.net/10467/86055 | |
dc.description.abstract | The electrical properties of concrete are gaining their importance for the application in building construction. In this study, graphite powder was added to alkali-activated slag mortar as an electrically conductive filler in order to enhance the mortar’s conductive properties. The amount of graphite ranged from 1% to 30% of the slag mass. The effect of the graphite powder on the resistivity, capacitance, mechanical properties, and microstructure of the composite was investigated. Selected mixtures were then used for the testing of self-sensing properties under compressive loading. The results show that the addition of an amount of graphite equal to up to 10% of the slag mass improved the electrical properties of the alkali-activated slag. Higher amounts of filler did not provide any further improvement in electrical properties at lower AC frequencies but caused a strong deterioration in mechanical properties. The best self-sensing properties were achieved for the mixture with 10 wt% of graphite, but only at low compressive stresses of up to 6 MPa. | eng |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | |
dc.publisher | MDPI AG | |
dc.relation.ispartof | Materials | |
dc.relation.uri | https://www.mdpi.com/1996-1944/12/10/1616 | |
dc.rights | Creative Commons Attribution (CC BY) 4.0 | |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | |
dc.subject | alkali-activated slag | eng |
dc.subject | graphite | eng |
dc.subject | electrical resistivity | eng |
dc.subject | self-sensing | eng |
dc.subject | compressive strength | eng |
dc.subject | microstructure | eng |
dc.title | Electrical and Self-Sensing Properties of Alkali-Activated Slag Composite with Graphite Filler | eng |
dc.type | článek v časopise | cze |
dc.type | journal article | eng |
dc.identifier.doi | 10.3390/ma12101616 | |
dc.relation.projectid | info:eu-repo/grantAgreement/Czech Science Foundation/GA/GA19-11516S/CZ/Geopolymers for smart applications in civil engineering/ | |
dc.rights.access | openAccess | |
dc.identifier.wos | 000471012500045 | |
dc.type.status | Peer-reviewed | |
dc.type.version | publishedVersion | |
dc.identifier.scopus | 2-s2.0-85066837555 |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
-
Publikační činnost ČVUT [1342]
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution (CC BY) 4.0