Zobrazují se záznamy 825-844 z 2019

    • Hierarchical Modeling of Mastic Asphalt in Layered Road Structures Based on the Mori-Tanaka Method 

      Autor: Valenta , Richard; Šejnoha , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      We present an application of the Mori-Tanaka micromechanical model for a description of the highly nonlinear behavior of asphalt mixtures. This method is expected to replace an expensive finite element-based fully-coupled ...
    • HIGH SPEED RAILWAY LINES – FUTURE PART OF CZECH RAILWAY NETWORK? 

      Autor: Týfa, Lukáš; Vodák, David
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The paper first describes high speed rail generally and explains the relationship between high speed and conventional railway networks (according to the vehicle types in operation on the network). The core of the paper is ...
    • HIGH STRAIN-RATE COMPRESSIVE TESTING OF FILLING MATERIALS FOR INTER-PENETRATING PHASE COMPOSITES 

      Autor: Doktor, Tomáš; Fíla, Tomáš; Zlámal, Petr; Kytýř, Daniel; Jiroušek, Ondřej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      In this study behavior of the selected types of filling material for the inter-penetrating phase composites was tested in compressive loading mode at low and high strain-rates. Three types of the filling material were ...
    • HIGH TEMPERATURE CYCLIC TEST RIG – A NEW RIG FOR HOT GAS PARTS LIFETIME VALIDATION 

      Autor: Ammer, Wieland; Raddatz, Mario; Gampe, Uwe; Nussbaum, Julien; Ruedel, Uwe; Kellerer, Rudolf
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      Flexible gas turbine operation requires adapted hot gas parts design and lifetime assessment methods. The High Temperature Cyclic Test Rig (HTCTR) is developed to cyclically test internally cooled components from combustor ...
    • High thermal conductivity concrete for energy piles 

      Autor: Di Girolamo, Luca; Ausiello, Gigliola; Russo, Gianpiero; Marone, Gabriella
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Research is increasingly focusing on thermal properties of concrete with the aim of reducing the heat exchange between buildings and environment. On the other hand, concretes with high thermal conductivity could have ...
    • High-performance concrete containing waste vitrified tiles 

      Autor: Mariaková, Diana; Fořtová, Kristina; Jirkalová, Zuzana; Pavlů, Tereza; Hájek, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      This contribution deals with the possibility to use waste vitrified tiles (VT) in high-performance concrete. Silica powder normally used in high-performance concrete is replaced by waste vitrified tiles in 25, 50, 75 and ...
    • High-Resolution X-Ray Spectroscopy of Galactic Supernova Remnants 

      Autor: Katsuda, Satoru; Tsunemi, Hiroshi
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      High-resolution X-ray spectroscopy of Galactic supernova remnants (SNRs), based on grating spectrometers onboard XMM-Newton and Chandra, has been revealing a variety of new astrophysical phenomena. Broadened oxygen lines ...
    • High-Speed Monitoring of Dust Particles in ITER ELMs Simulation Experiments with QSPA Kh-50 

      Autor: Makhlaj , Vadym A.; Garkusha , Igor E.; Aksenov , Nikolay N.; Chuvilo , Alexander A.; Landman , Igor S.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      Dust generation under powerful plasma stream impacts has been studied in ITER ELM simulation experiments with QSPA Kh-50 plasma accelerator. Repetitive plasma exposures of tungsten have been performed by 0.25 ms plasma ...
    • High-Speed Photo-Polarimetry of Magnetic Cataclysmic Variables 

      Autor: Potter, S. B.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      I review recent highlights of the SAAO High-speed Photo-POlarimeter (HIPPO) on the study of magnetic Cataclysmic Variables. Its high-speed capabilities are demonstrated with example observations made of the intermediate ...
    • High-speed rail network and periodic timetable: a comparative analysis of operational concepts 

      Autor: Drábek, Michal; Mazel, Dominik; Pospíšil, Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper compares chosen European high-speed railway (HS) networks in terms of their offer of HS passenger service. The criteria chosen for comparison are network topology, degree of service periodicity and degree of ...
    • High-speed rail – highway 2.0? 

      Autor: Krupík, Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      High-speed rail lines should make it possible to fully replace air transport over the medium distances of Europe (about 500 km). In the Czech Republic, they are beginning to design. Estimates suggest that in five years, ...
    • High-speed X-ray radiography for experiments in impact dynamics using high-power X-ray tube, cesium iodine scintillator and laboratory optical camera 

      Autor: Šleichrt, Jan; Falta, Jan; Fíla, Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      X-ray radiography and computed tomography have become well-established methods for investigation of internal structure of objects and for defectoscopy. Recently, the methods have even been used for in-situ analysis of ...
    • HIGH-TEMPERATURE GASIFICATION OF RDF WASTE AND MELTING OF FLY ASH OBTAINED FROM THE INCINERATION OF MUNICIPAL WASTE 

      Autor: Lázár , Marián; Čarnogurská , Mária; Lengyelová , Marta; Korba , Ján
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Objective of this paper is to describe innovative solutions of thermal processing of selected components of municipal waste (so-called RDF waste) using low-ionized depended plasma arc generated by a progressive and promising ...
    • HIGH-TEMPERATURE OXIDATION OF CHROME-NICKEL ALLOY 

      Autor: Chalupová, Adéla; Steinbrück, Martin; Grosse, Mirco; Krejčí, Jakub; Ševeček, Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      The investigations in this paper deal with the Cr-Ni alloy. The material has been recently proposed as a potential ATF concept, primarily due to its behaviour under high-temperature oxidation. A set of experiments to ...
    • HIGH-TEMPERATURE STEAM AND AIR OXIDATION OF CHROMIUM-COATED OPTIMIZED ZIRLO™ 

      Autor: Bourdon, Gauthier; Ševecek, Martin; Krejčí, Jakub; Cvrček, Ladislav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The presented study focuses on Cr-coated cladding material and its oxidation performance in high-temperature steam and air. As the substrate material, Optimized ZIRLO™ was used which was coated by chromium using unbalanced ...
    • High-Voltage IGBT turn-off at transition from overcurrent to desaturation 

      Autor: Chen, Weinan; Qin, Chaozheng; Lutz, Josef; Basler, Thomas
      (České vysoké učení technické v Praze. České centrum IET, 2021)
      The turn-off capability of a power semiconductor is normally given by the datasheet with test conditions. The RBSOA (Reverse Bias Safe Operation Area) diagram limits the collector-emitter peak voltage and maximum ...
    • HIGHLIGHTS FROM THE LHC 

      Autor: Straessner, Arno
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      The Large Hadron Collider (LHC) and the two multi-purpose detectors, ATLAS and CMS, have been operated successfully at record centre-of-mass energies of 7 ÷ 8TeV. This paper presents the main physics results from proton–proton ...
    • HIGHLY ACCURATE CALCULATION OF THE REAL AND COMPLEX EIGENVALUES OF ONE-DIMENSIONAL ANHARMONIC OSCILLATORS 

      Autor: Fernández Marcelo, Francisco; Garcia , Javier
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      We draw attention on the fact that the Riccati-Padé method developed some time ago enables the accurate calculation of bound-state eigenvalues as well as of resonances embedded either in the continuum or in the discrete ...
    • Highly Magnetized Accreting Pulsars: Are There Accreting Magnetars? 

      Autor: Blay, Pere; Reig, Pablo; Reglero, Víctor
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      2S 0114+650, GX 301-2, IGR J16358-4726, X Per, 4U 2206+54, SXP 1062, and 3A 1954+319 are thought to possess high magnetic elds. They have recently been named accreting magnetars, or highly magnetized accreting pulsars. In ...
    • Holding Pressure and Its Influence on Quality in PIM Technology 

      Autor: Petera , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The PIM (powder injection molding) process consists of several steps in which faults can occur. The quality of the part that is produced usually cannot be seen until the end of the process. It is therefore necessary to ...