Zobrazují se záznamy 1202-1221 z 2019

    • NANOINDENTATION AND ACCELERATED PROPERTY MAPPING OF PORTLAND CEMENT PASTE 

      Autor: Němeček, Jiří; Němeček, Jiří; Lukeš, Jaroslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      This paper presents a new nanoindentation mode: accelerated property mapping (XPM) applied to one year old Portland cement paste. The principle of the innovative method is similar to classical quasi-static nanoindentation ...
    • NANOINDENTATION OF HYDROGEN ENRICHED Zr-1Nb ZIRCONIUM ALLOY NUCLEAR FUEL CLADDINGS 

      Autor: Libera, Ondřej; Halodová, Patricie; Gávelová, Petra; Krejčí, Jakub
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      Zirconium alloys are being commonly used as a material of choice for nuclear fuel claddings in water cooled nuclear reactors for decades due to their good corrosion resistance and low neutron absorption. However, the ...
    • NATM TUNNELS – CONSIDERATION OF THE PARTLY DAMAGED PRIMARY LINING IMPACT FOR THE SECONDARY LINING EVALUATION 

      Autor: Trunda , Vlastislav; Hilar , Matouš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      Tunnels excavated by the New Austrian Tunnelling Method (NATM) are traditionally supported by a double-shell lining. The primary lining is generated from reinforced sprayed concrete with rockbolts, the secondary lining is ...
    • Natural fiber-reinforced light-weight cement blocks prepared from waste for sustainable development 

      Autor: Chandeng, Latda; Meesak, Thanawat; Tuakta, Chakrapan; Wisuthseriwong, Tidarut; Ueda, Tamon; Jongprateep, Oratai
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Low density of the light-weight cement blocks offers an advantage in terms of dead load reduction, which is advantageous in structural design-reduction of size and numbers of load-carrying structural components is possible. ...
    • Natural materials in building construction - annual evaluation 

      Autor: Michálková, Daniela; Ďurica, Pavol
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The construction industry's focus on a low-carbon economy will result in the need for a deeper examination of natural-based building materials. From an environmental point of view, the benefits of these materials are ...
    • NETGRAPH – AN EFFICIENT TOOL FOR PERIODIC TIMETABLING AND CAPACITY PLANNING 

      Autor: Michl, Zdeněk; Drábek, Michal; Vávra, Rudolf
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      A netgraph is a graphical representation of a periodic timetable concept for given spatial or modal scope. It adds a third dimension to the network plan – time. Despite no strictly prescribed rules, a common practice ...
    • Neural network based patient recovery estimation of a PAM-based rehabilitation robot 

      Autor: Dinh, Van-Vuong; Trinh, Minh-Chien; Bui, Tien-Dat; Duong, Minh-Duc; Dao, Quy-Thinh
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Rehabilitation robots have shown a promise in aiding patient recovery by supporting them in repetitive, systematic training sessions. A critical factor in the success of such training is the patient’s recovery progress, ...
    • NEURINGER-ROSEINWEIG MODEL BASED LONGITUDINALLY ROUGH POROUS CIRCULAR STEPPED PLATES IN THE EXISTENCE OF COUPLE STRESS 

      Autor: Vashi , Yoginibahen Devendrasinh; Patel , Rakesh Manilal; Deheri , Gunamani Biswanath
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      This study intents to scrutinize the impact of ferrofluid in the presence of couple stress for longitudinally rough porous circular stepped plates. The influence of longitudinal surface roughness is developed using the ...
    • NEUTRINOLESS DOUBLE BETA DECAY: AN EXTREME CHALLENGE 

      Autor: Ferroni, Fernando
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      Neutrino-less Double Beta Decay is the only known way to possibly resolve the nature of neutrino mass. The chances to cover the mass region predicted by the inverted hierarchy require a step forward in detector capability. ...
    • NEUTRINOS AS COSMIC MESSENGERS IN THE ERA OF ICECUBE, ANTARES AND KM3NET 

      Autor: Katz, Uli F.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      Using neutrinos as cosmic messengers for observation of non-thermal processes in the Universe is a highly attractive and promising vision, which has been pursued in various neutrino telescope projects for more than two ...
    • NEUTRINOS FROM ICARUS 

      Autor: Farnese, Christian
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      Liquid Argon Time Projection Chambers are very promising detectors for neutrino and astroparticle physics due to their high granularity, good energy resolution and 3D imaging, allowing for a precise event reconstruction. ...
    • Neutronic analysis of a heat-pipe cooled reactor 

      Autor: Sabol, Josef; Frýbort, Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Heat-pipe cooled reactors belong to the group of nuclear reactors using heat pipes filled with liquid metals (such as sodium or potassium) to cool the core. Due to the passive heat removal system, there is no need to use ...
    • NEUTRONIC ANALYSIS OF THE CANDIDATE MULTI-LAYER CLADDING MATERIALS WITH ENHANCED ACCIDENT TOLERANCE FOR WWER REACTORS 

      Autor: Novák, Ondřej; Ševeček, Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      The paper summarizes preliminary results of neutronic analysis of candidate ATF cladding materials that are under development at the CTU in Prague. To evaluate basic neutronics-related characteristics the Serpent code was ...
    • New Abrasive Materials and Their Influence on the Surface Quality of Bearing Steel After Grinding 

      Autor: Jusko , Ondrej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper focuses on the influence of various types of abrasive grains on cutting properties during the grinding process for bearing steel. In this experiment, not only conventional super-hard abrasive materials but also ...
    • NEW APPROACH FOR ONLINE ARABIC MANUSCRIPT RECOGNITION BY DEEP BELIEF NETWORK 

      Autor: Samir , Benbakreti; Boukelif , Aoued
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      In this paper, we present a neural approach for an unconstrained Arabic manuscript recognition using the online writing signal rather than images. First, we build the database which contains 2800 characters and 4800 words ...
    • NEW CONCEPT OF SOLVABILITY IN QUANTUM MECHANICS 

      Autor: Znojil , Miloslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      In quite a few recent quantum models one is allowed to make a given Hamiltonian H self-adjoint only after an ad hoc generalization of Hermitian conjugation, H†→H‡:= Θ −1H†Θ wherethe suitable operator Θ is called Hilbert-space ...
    • New Insights from Inside-Out Doppler Tomography 

      Autor: Kotze, E. J.; Potter, S. B.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      We present preliminary results from our investigation into using an “inside-out” velocity space for creating a Doppler tomogram. The aim is to transpose the inverted appearance of the Cartesian velocity space used in normal ...
    • NEW METHOD EVALUATION OF DETAIL MATERIAL AND HEAT FLOWS FOR SINGLE STRING CEMENT CLINKER PLANT 

      Autor: Darmanto, Prihadi Setyo; Astina, I Made; Wardhana, Alfian Kusuma; Amalia, Alfi; Syahlan, Arief
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Material flow in each main equipment of a cement clinker plant, which is very useful for controlling the process, is impossible to be measured during operation due to very high temperatures. This paper intends to overcome ...
    • New method for Si-wafer resistivity determination 

      Autor: Hájek, J.; Papež, V.; Horák, M.
      (České vysoké učení technické v Praze. České centrum IET, 2021)
      Wafer resistivity is one of the most important parameters in production of Power Semiconductor Devices (PSD). This parameter is mainly responsible for achieving required breakdown voltage and ...
    • New or existing, does it matter? 

      Autor: Tanner, Peter; Hingorani, Ramon; Lara, Carlos
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Both when designing new and when evaluating existing structures, methods of analysis must be based on established engineering theory and practice. Also, the general principles of structural reliability regarding the treatment ...