Prohlížení Ústřední knihovna ČVUT dle názvu

Zobrazují se záznamy 1956-1975 z 2019

    • V2282 Sgr Revisited 

      Autor: Nesci, Roberto; Rossi, Corinne; Frasca, Antonio; Marilli, Ettore; Persi, Paolo; Cornero, Nicola
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      The nature of V2282 Sgr is examined on the basis of several multiband observations: a 20 years long I-band light curve of V2282 Sgr obtained from archive photographic plates of the Asiago and Catania Observatories; a CCD ...

    • VALIDATION AND IMPLEMENTATION OF FAILURE PARAMETERS IN INTEGRATED SIMULATIONS FOR SHORT FIBRE REINFORCED POLYPROPYLENE 

      Autor: Kalteis, Anna; Reiter, Martin; Jerabek, Michael; Major, Zoltán
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Nowadays short fibre reinforced polymers are often used in load carrying structural parts. Compared to continuous fibre reinforced polymers they exhibit a more complex morphology. Hence the determination of the strength ...

    • Validation of a longitudinal motorcycle riding dynamic model for a powered two-wheeler interactive simulator 

      Autor: Svoboda, Josef; Toman, Přemysl; Orlický, Adam
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Engine or battery powered two-wheeled vehicles are an essential part of a transport system. Its users are however more vulnerable in comparison with personal vehicles. In general, compared to four-wheel vehicles even a ...

    • VALIDATION OF CUTTING FORCE CHARACTERISTIC FOR COMPLEX TOOLPATH 

      Autor: Sykora, Henrik Tamás; Kovács, Attila; Bachrathy, Dániel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      In the design phase of the milling process, there is a great need for the prediction of the cutting force, the required torque and power of the spindle. These informations could be used to optimize the tool path and improve ...

    • VALIDATION OF LINKED SIMULATION FOR FIRE-EXPOSED CONCRETE STRUCTURES 

      Autor: Šulc, Stanislav; Šmilauer, Vít; Wald, František
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      This article presents linked computational approach for fire simulation and its effects on structure using adiabatic surface temperature. The simulation solves a weakly-linked problem, consisting of computational fluid ...

    • VARIATIONALLY-BASED EFFECTIVE DYNAMIC THICKNESS FOR LAMINATED GLASS BEAMS 

      Autor: Schmidt, Jaroslav; Zemanová, Alena; Janda, Tomáš; Zeman, Jan; Šejnoha, Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Laminated glass, consisting of glass layers connected with transparent foils, has found its applications in civil, automotive, or marine engineering. Due to a high contrast in layer properties, mechanical response of ...

    • VDI/VDE 2634 Part 1 

      Autor: VEREIN DEUTSCHER INGENIEURE; VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK
      (Beuth Verlag, 2002)

    • VDI/VDE 2634 Part 2 

      Autor: VEREIN DEUTSCHER INGENIEURE; VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK
      (Beuth Verlag, 2012)

    • VDI/VDE 2634 Part 3 

      Autor: VEREIN DEUTSCHER INGENIEURE; VERBAND DER ELEKTROTECHNIK ELEKTRONIK INFORMATIONSTECHNIK
      (Beuth Verlag, 2008)

    • VECTOR MAPS IN MOBILE ROBOTICS 

      Autor: Jelinek, Ales
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The aim of this paper is to provide a brief overview of vector map techniques used in mobile robotics and to present current state of the research in this field at the Brno University of Technology. Vector maps are described ...

    • Vehicle/track interaction under the conditions of high speed railway operation 

      Autor: Šlapák, Jiří; Michálek, Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper deals with the issue of dynamic effects of a high-speed railway vehicle on the track. Some aspects of vehicle/track interaction at higher speeds are described. In this context, a multi-body model of high-speed ...

    • Velikhov Electrothermal Instability Cancellation by a Modification of Electrical Conductivity Value in a Streamer by Magnetic Confinement 

      Autor: Petit , Jean P.; Dore , Jean C.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      We present a method, confirmed experimentally, allowing the cancellation of Velikhov instability by operating a local magnetic field reduction along a lane, which enhances local electric conductivity and electron-gas ...

    • VERIFICATION AND VALIDATION OF NUMERICAL MODEL OF FIRE AND SMOKE DEVELOPMENT IN RAILWAY TUNNEL 

      Autor: Cabová , Kamila; Wald , František
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The paper describes verification and validation of numerical model of fire and smoke development in a railway tunnel carried out in numerical code Fire Dynamic Simulator. To evaluate a correctness of numerical solution of ...

    • VERIFICATION OF BEHAVIOUR OF HUMAN ENAMEL FOR FRACTURE TOUGHNESS DETERMINATION 

      Autor: Hájková , Petra; Jíra , Aleš; Řehounek , Luboš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      Enamel is the hardest biological tissue in the human body because of its structureand composition. The structure of interlocking rods enables this biomaterial to resist the stresses of mastication. Unfortunately, enamel ...

    • VERIFICATION OF CENSUS DEVICES IN TRANSPORTATION RESEARCH 

      Autor: Petrů, Jan; Kludka, Michal; Krivda, Vladislav; Mahdalova, Ivana; Zeman, Karel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The article presents a comparison of three devices and two methods that are used to count traffic flow. All measurements were carried out at a roundabout in Ostrava, where the following devices were used: Viacount II, Icoms ...

    • VERIFICATION OF THE BASIC PROPERTIES OF RECYCLED AND NATURAL AGGREGATES 

      Autor: Mikulica, Karel; Hájková, Iveta
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      In the future, it is planned to use up to 50% of construction and demolition waste (C&DW) for the production of new building structures. This leads us to think about how we can use recycled concrete aggregate (RCA) as ...

    • VERIFICATION OF THE BEARING CAPACITY OF PILES 

      Autor: Turček, Peter; Súľovská, Monika
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The location of the buses in the basement of the new bus station in Bratislava, supplemented by two further parking floors below, shifted the foundation joint of the new bus station to a depth of approximately 14 m. The ...

    • Verification of window properties after 10 years of exploitation: results of measurements in the pavilion laboratory and the climate chamber 

      Autor: Bartko, Marek; Durica, Pavol
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The article will deal with the analysis of measured data on a plastic window with thermal insulating triple glazing, which is suitable for low-energy or passive houses. The window was installed in 2011 in the test laboratory ...

    • VERSATILE CHIRP SINE GENERATOR ON FIXED-POINT FPGA 

      Autor: Kunz, Jan; Beneš, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      This paper deals with a logarithmic and a linear chirp sine generation on a fixed-point FPGA mainly for vibration testing, nevertheless, the generator can also be used in other areas. A basic overview of the logarithmic ...

    • Vědecká komunikace a sdílení informací v rámci odborně zaměřených sociálních sítí 

      Autor: Trtíková, Ilona
      (Kabinet informačních studií a knihovnictví Filozofické fakulty Masarykovy univerzity v Brně, 2012)
      Současná vědecká odborná činnost se často odehrává v týmech, a to i na mezinárodní úrovni. To klade nároky na možnosti komunikace, sdílení informací v rámci týmu či odborné komunity a na vyhledávání nových partnerů a ...