Zobrazují se záznamy 785-804 z 2019

    • GENERAL CALCULATION OF WINDING FACTOR FOR MULTI-PHASE/-LAYER ELECTRICAL MACHINES IRRESPECTIVE OF POLES NUMBER 

      Autor: Ouamara , Daoud; Dubas , Frédéric; Randi Ali, Sid; Benallal Nadjib, Mohamed; Espanet , Christophe
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      In this paper, a method to calculate the winding factor by only considering stator parameters without the rotor ones is developed. This is interesting because it allows the separation of the stator and rotor design, unlike ...
    • GENERAL MODEL OF RADIATIVE AND CONVECTIVE HEAT TRANSFER IN BUILDINGS: PART I: ALGEBRAIC MODEL OF RADIATIVE HEAT TRANSFER 

      Autor: Ficker , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Radiative heat transfer is the most effective mechanism of energy transport inside buildings. One of the methods capable of computing the radiative heat transport is based on the system of algebraic equations. The algebraic ...
    • GENERAL MODEL OF RADIATIVE AND CONVECTIVE HEAT TRANSFER IN BUILDINGS: PART II: CONVECTIVE AND RADIATIVE HEAT LOSSES 

      Autor: Ficker , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The present paper represents the second part of the serial publication, which deals with convective and radiative heat transfers in buildings. The algebraic computational method for combined convective-radiative heat ...
    • General quality of urban greenery as a city indicator in Brazil in comparison with central Europe 

      Autor: Larrubia de Almeida Júnior, Jobson; Pondělíček, Michael
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2024)
      The evidence for climate change and its associated consequences, such as severe droughts, floods, and storms, exposed the need to investigate the ways that countries can cope with them, especially Brazil, which is a ...
    • Generalized Continuity Equation for Quasi-Hermitian Hamiltonians 

      Autor: Hammou , Amine B.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      The continuity relation is generalized to quasi-Hermitian one-dimensional Hamiltonians. As an application we show that the reflection and transmission coefficients computed with the generalized current obey the conventional ...
    • Generalized three-body harmonic oscillator system: ground state 

      Autor: Escobar-Ruiz, Adrian M.; Montoya, Fidel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      In this work we report on a 3-body system in a d−dimensional space ℝd with a quadratic harmonic potential in the relative distances rij = |ri −rj| between particles. Our study considers unequal masses, different spring ...
    • Generation of LDPM structure formed by Voronoi cells 

      Autor: Vozáb, Jan; Vorel, Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      A preliminary study of an approach to internal structure generation used in lattice discrete particle models (LDPMs) [1]. The presented method used for particle generation and placement is intended to help realistically ...
    • Generation of mesostructure for lattice discrete particle model 

      Autor: Vozáb, Jan; Vorel, Jan; Marcon, Marco; Podroužek, Jan; Wan-Wendner, Roman
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      A preliminary study of two approaches for the internal structure generation utilized in the lattice discrete particle models (LDPM) [1] is presented. The presented methods used for particle generation and placement are ...
    • GENERATION OF TRANSPORT PATHS IN FRACTURED POROUS MEDIA 

      Autor: Říha , Jakub; Královcová , Jiřina
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      In this article, a method for generation of transport paths in combined equivalent porous media / discrete fracture network computational meshes is proposed as an alternative to a particle tracking method. It is based on ...
    • Genetic algorithms to determine the optimal parameters of an ensemble local mean decomposition 

      Autor: Silva, Willian T. F. D.; Borges, Filipe D. D. M.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      An optimization method for an ensemble local mean decomposition (ELMD) parameters selection using genetic algorithms is proposed. The execution of this technique depends heavily on the correct choice of the parameters of ...
    • Geometric approach to solving inverse kinematics of six DOF robot with spherical joints 

      Autor: Hadidi, Nacer; Bouaziz, Mohamed; Mahfoudi, Chawki; Zaharuddin, Mohamed
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Inverse kinematics is a fundamental concept in robotics that plays a crucial role in a robot’s ability to perform tasks. In this contribution, we propose a novel geometric approach based on vector calculus to solve the ...
    • Geometrical Modeling of Concrete Microstructure for the Assessment of ITZ Percolation 

      Autor: Rypl , Daniel; Bým , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Percolation is considered to be a critical factor affecting the transport properties of multiphase materials. In the case of concrete, the transport properties are strongly dependent on the interfacial transition zone ...
    • GEOMETRICAL OPTIMIZATION OF DENTAL IMPLANTS WITH REGARD TO OSSEOINTEGRATION 

      Autor: Řehounek, Luboš; Denk, František; Jíra, Aleš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      A newly developed reference dental implant specimen type was subjected to numerical simulations of osseointegration. The goal of these tests was to optimize the geometry of the implant so as to reduce local stress ...
    • GEOMETRY AND MECHANICAL PROPERTIES OF A 3D-PRINTED TITANIUM MICROSTRUCTURE 

      Autor: Řehounek, Luboš; Hájková, Petra; Vakrčka, Petr; Jíra, Aleš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      Construction applications sometimes require use of a material other than construction steel or concrete – mainly in cases, where strength to weight ratio needs to be considered. A suitable solution to this problem are ...
    • Geophysics for underground engineering 

      Autor: Bláha, Pavel; Duras, Roman; Gebauer, Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      The growth of underground engineering brought a need for the use of geophysical methods for research of underground constructions rather different in approach compared to that of civil engineering. These changes relate to ...
    • GEOTECHNICAL ANALYSIS OF TRANSFORMING A WATER MANAGEMENT STRUCTURE TO A TRANSPORTATION STRUCTURE 

      Autor: Slávik, Ivan; Hruštinec, Luboš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper analyzes the transformation of the culvert channel under the supply channel of the Gabcíkovo Waterworks into a road tunnel structure and the impact this had on the surrounding rock environment. It presents the ...
    • Geotechnical and microstructural properties of cement-treated laterites stabilized with rice husk ash and bamboo leaf ash 

      Autor: Nnochiri, Emeka Segun; Ogundipe, Olumide Moses; Ola, Samuel Akinlabi
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This study investigated the geotechnical and microstructural properties of cement-treated laterites stabilized with rice husk ash and bamboo leaf ash. In going about the tests, the soil sample was subjected to compaction, ...
    • GLASS WASTE POWDER UTILIZATION IN HIGH PERFORMANCE CONCRETE 

      Autor: Mariaková, Diana; Vlach, Tomáš; Pavlů, Tereza
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      This paper deals with investigation of high-performance concrete (HPC) with full replacement of the silica powder by the waste glass powder. The silica powder was replaced by two types of the waste glass powder, originated ...
    • gln+1 ALGEBRA OF MATRIX DIFFERENTIAL OPERATORS AND MATRIX QUASI-EXACTLY-SOLVABLE PROBLEMS 

      Autor: Smirnov F., Yuri; Turbiner , Alexander
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      The generators of the algebra gln+1 in the form of differential operators of the first order acting on Rn with matrix coefficients are explicitly written. The algebraic Hamiltonians for matrix generalization of 3−body ...
    • Global Optima for Size Optimization Benchmarks by Branch and Bound Principles 

      Autor: Pospíšilová , Adéla; Lepš , Matej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper searches for global optima for size optimization benchmarks utilizing a method based on branch and bound principles. The goal is to demonstrate the process for finding these global optima on the basis of two ...