Prohlížení Ústřední knihovna ČVUT dle názvu

Zobrazují se záznamy 380-399 z 2019

    • Concepts of Emission Reduction in Fluidized Bed Combustion of Biomass 

      Autor: Purgar , Amon; Winter , Franz
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      A status report on fluidized bed technology in Austria is under preparation, in response to the Fluidized Bed Conversion multi-lateral technology initiative of the International Energy Agency. This status report focuses ...

    • Concluding Address 

      Autor: Giovannelli, Franco
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      Before I offcially conclude this workshop - far be it from me to attempt to compete with some concluding remarks already delivered at the meeting with various levels of passion by Gennady Bisnovatyi-Kogan, Giulio Auriemma ...

    • Concluding Remarks 

      Autor: Bisnovatyi-Kogan, Gennady S.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      Short comments to the conference talks.

    • Concluding Remarks 

      Autor: Bisikalo, D. V.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Concluding Remarks

    • Concrete admixtures - sustainable concrete 

      Autor: Schwoon, Oliver
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Durability of concrete, an important part of the sustainability theme, was, is, and will be one of the main topics for large infrastructure projects like the Gotthard base tunnel. For such important structures a service ...

    • Concrete lintels reinforced with steel fibres oriented by a magnetic field 

      Autor: Carrera, Kristýna; Künzel, Karel; Konrád, Petr; Sovják, Radoslav; Papež, Václav; Mára, Michal; Fornůsek, Jindřich; Kheml, Přemysl
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      This paper explores the possibility of applying the technique of magnetic orientation of steel fibres for manufacturing a concrete structural element of realistic dimensions, compared to small laboratory specimens. This ...

    • CONDENSATION OF WATER VAPOR IN A VERTICAL TUBE CONDENSER 

      Autor: Havlík , Jan; Dlouhý , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      This paper presents an analysis of heat transfer in the process of condensation of water vapor in a vertical shell-and-tube condenser. We analyze the use of the Nusselt model for calculating the condensation heat transfer ...

    • Conformity assessment model for mechanical coupling devices and anchors for reinforcing steel for use in concrete structure 

      Autor: Brankley, Lee; Turgul, Ayhan; Morgan, Lyn; Camci, Ladin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The use of mechanical coupling devices and anchors for reinforcing steel for use in concrete structures can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required. ...

    • Connected design decision networks: Multidisciplinary decision support for early building design LCA 

      Autor: Forth, Kasimir; Schneider-Marin, Patricia; Theißen, Sebastian; Höper, Jannick; Svane, Nanna Dyrup; Borrmann, André
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Life Cycle Assessment (LCA) has become the standard method to evaluate environmental impact throughout the life cycle of buildings. However, detailed data about the future building as well as knowledge about the mutual ...

    • Conserved quantities in non-hermitian systems via vectorization method 

      Autor: Agarwal, Kaustubh S.; Muldoon, Jacob; Joglekar, Yogesh N.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Open classical and quantum systems have attracted great interest in the past two decades. These include systems described by non-Hermitian Hamiltonians with parity-time (PT) symmetry that are best understood as systems ...

    • CONSIDERATIONS FOR BRITTLENESS IN TAILINGS 

      Autor: Herza, Jiří; Singh, Ryan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Brittleness is an important geotechnical parameter of soils as it describes the degree of reduction of the soil shear resistance after reaching the peak strength. [1] described soil brittleness by means of a brittleness ...

    • Considerations on an embedded pile’s effective length in an analytical calculation according to the commentary on the STN 73 1002 standard 

      Autor: Stacho, Jakub; Súľovská, Monika
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      The analytical model for calculating the bearing capacity of a pile, presented in the commentary to STN 73 1002 – Pile Foundations, gives a recommendation to reduce the pile’s length in the calculation of the shaft resistance. ...

    • CONSTITUTIVE MODEL FOR TIMBER FRACTURE USED FOR FE SIMULATION OF LVL ARCH 

      Autor: Šmídová, Eliška; Kabele, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      Non-linear finite element simulation of four-point bending test of a small-size arch is described in this paper. The arch of 780mm span is made of Yellow Poplar (Liriodendron tulipifera) laminated veneer lumber (LVL) and ...

    • CONSTITUTIVE MODEL OF STEEL FIBRE REINFORCED CONCRETE SUBJECTED TO HIGH TEMPERATURES 

      Autor: Blesak , Lukas; Goremikins , Vadims; Wald , Frantisek; Sajdlova , Tereza
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Research on structural load-bearing systems exposed to elevated temperatures is an active topic in civil engineering. Carrying out a full-size experiment of a specimen exposed to fire is a challenging task considering not ...

    • CONSTRAINING SPACETIME TORSION WITH THE MOON, MERCURY AND LAGEOS 

      Autor: March, Riccardo; Bellettini, Giovanni; Tauraso, Roberto; Dell’Agnello, Simone
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      We consider an extension of Einstein General Relativity where, beside the Riemann curvature tensor, we suppose the presence of a torsion tensor. Using a parametrized theory based on symmetry arguments, we report on some ...

    • Construction 4.0 in the concept of the railway 

      Autor: Krupík, Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The digital and technological innovations that have been developing massively in recent years are often referred to as the 4th Industrial Revolution or Industry 4.0. The construction industry seems to be somewhat on the ...

    • Construction of angular-dependent potentials from trigonometric Pöschl-Teller systems within the Dunkl formalism 

      Autor: Schulze-Halberg, Axel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      We generate solvable cases of the two angular equations resulting from variable separation in the three-dimensional Dunkl-Schrödinger equation expressed in spherical coordinates. It is shown that the Dunkl formalism ...

    • Continued Fractions of Square Roots of Natural Numbers 

      Autor: Balková, Ĺubomíra; Hrušková, Aranka
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      In this paper, we will first summarize known results concerning continued fractions. Then we will limit our consideration to continued fractions of quadratic numbers. The second author describes periods and sometimes the ...

    • CONTRA-ROTATING PROPELLER AERODYNAMICS SOLVED BY A 3D PANEL METHOD WITH COUPLED BOUNDARY LAYER 

      Autor: Štorch , Vít; Nožička , Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The aerodynamics of contra-rotating propellers is a complex three-dimensional problem of an unsteady flow, which is often approached by assuming numerous simplifications. Presented computational model combines a 3D panel ...

    • Contribution of fly ash to mortar strength development under steam and internal curing 

      Autor: Insako, Ryo; Miyoshi, Yuki; Huynh, Phat Tan; Ogawa, Yuko; Kawai, Kenji
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      The purpose of this study is to quantitatively evaluate the effects of steam curing and internal curing on contribution of fly ash to strength development of mortar by using cementing efficiency factor (k-value) that ...