Zobrazují se záznamy 1532-1551 z 2019

    • Remapping and simulation of EFI system for SI engine using piggyback ECU 

      Autor: Diep, Hau Than; Nguyen, Gia Buu; Mohamad, Barhm
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Electronic fuel injection (EFI) is a complex system, many parts are connected together from mechanical parts to electronic parts to control the internal combustion engine. It must ensure many different works and the most ...
    • REMEDIATION OF A RAILWAY EMBANKMENT USING GEOCELLS AND DEEP SOIL MIXING - A NUMERICAL ANALYSIS 

      Autor: Štefaňák, Jan; Vašina, Josef
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Progressive settlement of the embankment under the railway track near Žďár nad Sázavou, the Czech Republic, has been observed for many years. Immediate improvement was needed to secure the safety of the traffic and to ...
    • REMOVAL OF DIQUATERNARY AMMONIUM CATIONS FROM AS-SYNTHESIZED SSZ-16 ZEOLITE 

      Autor: Supinkova, Tatana; Jirka, Ivan; Drahokoupil, Jan; Langmaier, Jan; Fila, Vlastimil; Brabec, Libor; Kocirik, Milan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Zeolites are stable microporous aluminosilicates with numerous applications in chemical technology such as separation of species and catalytic transformations. Our study is focused on a weakly explored zeolite SSZ-16 with ...
    • Replacing Natural Gas by Biogas — Determining the Bacterial Contamination of Biogas by PCR 

      Autor: Čermáková , Jiřina; Mrázek , Jakub; Fliegerová , Kateřina; Tenkrát , Daniel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      A promising way of using biogas is to upgrade it to natural gas, which is referred to as Substitute Natural Gas (SNG) or biomethane. Biomethane, or biogas, is produced by biological processes of harnessing the ability of ...
    • Rescue of a stone bridge with respect to current condition and standards 

      Autor: Řeřicha, Petr; Fajman, Petr; Davis, Lucy
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      A three span stone masonry bridge dating back to the middle of the 19th century, still in the roadway network, is assessed to prevent its demolition. Its industrial heritage value and ecological concerns were the principal ...
    • Research and development of CO2 Capture and Storage Technologies in Fossil Fuel Power Plants 

      Autor: Pilař , Lukáš; Hrdlička , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents the results of a research project on the suitability of post-combustion CCS technology in the Czech Republic. It describes the ammonia CO2 separation method and its advantages and disadvantages. The ...
    • Research and implementation of motorcycle simulator controls 

      Autor: Svoboda, Josef; Toman, Přemysl; Orlický, Adam
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      The paper is focused on research in the field of motorcycle simulator controls from the rider’s point of view, with a focus on the longitudinal and lateral dynamics of vehicle. The subject of the research is the design and ...
    • Research focused on low carbonation of concrete under old cement-based render 

      Autor: Paulík, Peter; Gašpárek, Jakub; Bačuvčík, Michal; Janotka, Ivan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      In-situ research and laboratory study of the concrete of old bridges shows that despite the low strength classes of concrete and the long time of exposure to CO2, it is possible to moderate the depth of their carbonation. ...
    • Research tools aplicable in designing of high-speed and high-power rail vehicles 

      Autor: Dybala, Vojtěch
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The importance of the railway transport of both goods and passengers continuously grows as it is in many points of view more ecological and economical solution in comparison with road transport. Just the importance has ...
    • Research Trends for PID Controllers 

      Autor: Visioli , Antonio
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper analyses the most significant issues that have been recently been addressed by researchers in the field of Proportional-Integral-Derivative (PID) controllers. In particular, the most recent techniques proposed ...
    • Research, protection, and possibilities of re-use of post-war industrial heritage in the Czech Republic 

      Autor: Popelová, Lenka; Šenberger, Tomáš; Čunderlík, Tomáš; Lapšanský, Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      Buildings of an industrial nature dated from the 1950s through '80s are often quite interesting from the standpoint of typology, architecture and technology, and correspond to the development of technological industrial ...
    • RESIDUAL HEAT ESTIMATION OF NUCLEAR FUEL IN ENERGY WELL REACTOR 

      Autor: Šošková, Jana; Dambrosio, Antonio; Mazzini, Guido; Ruščák, Marek
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Energy Well (EW) is a concept of a small modular reactor, designed as a source of energy for places with low infrastructure. Its design combines TRISO fuel particles, graphite moderator and molten salt coolant. One of key ...
    • RESIDUAL HEAT POWER REMOVAL FROM SPENT NUCLEAR FUEL DURING DRY AND WET STORAGE 

      Autor: Vlček, Daniel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      This project deals with the thermal analyses of the wet and dry storages of the spent nuclear fuel. The dry spent fuel storage sub-channel code COBRA-SFS has been used in order to calculate the temperature field. In this ...
    • RESIDUAL PROPERTIES OF FIBER-REINFORCED REFRACTORY COMPOSITES WITH A FIRECLAY FILLER 

      Autor: Jogl , Marcel; Reiterman , Pavel; Holčapek , Ondřej; Koťátková , Jaroslava; Konvalinka , Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The aim of our study was to develop a composite material for industrial use that is resistant to the effect of high temperatures. The binder system based on aluminous cement was modified by adding finely-ground ceramic ...
    • RESISTANCE OF MORTARS WITH GYPSUM, LIME AND COMPOSITE BINDERS AGAINST MOLDS 

      Autor: Krejsová, Jitka; Doleželová, Magdaléna
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Resistance of three mortars (the lime mortar, the gypsum mortar and the mortar with the composite binder) against molds was evaluated. Mortars were also compared according to their pH, bulk density, strength and porosity. ...
    • Resistance Spot Welding of dissimilar Steels 

      Autor: Kolařík , Ladislav; Sahul , Miroslav; Kolaříková , Marie; Sahul , Martin; Turňa , Milan; Felix , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents an analysis of the properties of resistance spot welds between low carbon steel and austenitic CrNi stainless steel. The thickness of the welded dissimilar materials was 2 mm. A DeltaSpot welding gun ...
    • RESONANCES ON HEDGEHOG MANIFOLDS 

      Autor: Exner , Pavel; Lipovský , Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      We discuss resonances for a nonrelativistic and spinless quantum particle confined to a two- or three-dimensional Riemannian manifold to which a finite number of semiinfinite leads is attached. Resolvent and scattering ...
    • RESONANT SWITCH MODEL OF HF QPOS AND EQUATIONS OF STATE OF NEUTRON STARS AND QUARK STARS 

      Autor: Stuchlík , Zdenek; Urbanec , Martin; Kotrlová , Andrea; Török , Gabriel; Goluchová , Katerina
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      The mass and spin estimates of the 4U 1636−53 neutron star obtained by the Resonant Switch (RS) model of high-frequency quasi-periodic oscillations (HF QPOs) are tested by a large variety of equations of state (EoS) governing ...
    • RESPONSE AND DAMAGE EVOLUTION OF SINGLE EDGE NOTCHED TIMBER BEAMS UNDER THREE-POINT BENDING 

      Autor: Šmídová, Eliška; Kabele, Petr; Šejnoha, Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      Two groups of small-size single edge notched beams (SENB) made of European spruce (Picea abies) were tested in three-point bending (3PB) until failure under displacement control. The first group comprised of eight solid ...
    • RESPONSE OF HIGH-PERFORMANCE FIBRE REINFORCED CONCRETE REINFORCED BY TEXTILE REINFORCEMENT TO IMPACT LOADING 

      Autor: Vogel, Filip; Holčapek, Ondřej; Konvalinka, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Generally, cement composites like high-performance concrete (HPC) are very brittle. The resistance to the impact loading of the HPFRC and the HPFRC reinforced by the textile reinforcement are compared in this article. The ...