Využití stereolitografie pro výrobu pokročilých porézních materiálů
Stereolithography for Manufacturing of Advanced Porous Solids
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Veronika Drechslerová
Vedoucí práce
Šleichrt Jan
Oponent práce
Zárybnická Lucie
Studijní obor
Dopravní systémy a technikaStudijní program
Technika a technologie v dopravě a spojích 3Instituce přidělující hodnost
ústav mechaniky a materiálůPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Předmětem bakalářské práce je popis a využití technologie 3D tisku pracující na principu vytvrzování polymerů pomocí záření určité vlnové délky – stereolitografie. Práce je věnována osvojení si ovládání 3D resinové tiskárny, návrhu vhodného nastavení vstupních parametrů výrobního procesu a stanovení hodnot základních mechanických charakteristik použitých materiálů. Pro účely této práce byly navrženy a testovány dva typy zkušebních vzorků 3D tištěných materiálů. Jeden typ byl určen pro kvazi-statické mechanické zatěžování tahem a druhý pro kvazi-statické mechanické zatěžování tlakem. Vzorky na tlakovou zkoušku byly navrženy jako porézní materiály, přesněji auxetické materiály se strukturou známou pod názvem re-entrant hexagonal honeycomb. Na základě získaných a prezentovaných výsledků v této práci byl identifikován vhodný materiál a technologický postup pro využití stereolitografie k výrobě vybrané auxetické struktury. The focus of the bachelor thesis is the description and the utilisation of a 3D printing technology working on the principle of curing polymers by the means of radiation of a certain wavelength - stereolithography. The thesis is focused on mastering the set up of a 3D resin printer, designing an appropriate setting of the input parameters of the production process and determining the values of basic mechanical characteristics of the materials used for production. For the purpose of this work, two types of 3D printed test specimens were designed and tested. One type was designed for quasi-static mechanical tensile loading and the other for quasi-static mechanical compressive loading. The compressive test specimens were designed as porous materials, more precisely auxetic materials with a\ti{re-entrant hexagonal honeycomb} structure. Based on the results obtained and presented in this work, a suitable material and technological procedure for the use of stereolithography to fabricate the selected auxetic structure was identified.