Show simple item record

dc.contributor.authorDragošek , Lukáš
dc.contributor.authorKociško , Róbert
dc.contributor.authorKováčová , Andrea
dc.contributor.authorBidulsky , Robert
dc.contributor.authorŠkrobian , Milan
dc.date.accessioned2017-02-09T10:01:47Z
dc.date.available2017-02-09T10:01:47Z
dc.date.issued2015
dc.identifier.citationActa Polytechnica. 2015, vol. 55, no. 5, p. 301-305.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/67223
dc.description.abstractThis study reports on an investigation of factors affect the process of compacting Al chips which are used to direct scrap processing through the forward extrusion method. EN AW 6060 chips of different geometry and types were mainly used as the experimental material. The chips were compacted in a die with a vertical channel (10.3mm in diameter). To provide a range of processing conditions, three different weights were selected and compacting was performed under five, different compacting pressures. The movement of the chips within the die during compacting was analysed through numerical simulations using Deform 2D software. Study of the compacting process optimal parameters for increasing the density and enhancing the density distribution were defined. The results from our study clearly show that optimal conditions are obtained when the proportion of D/h is 1/1.1. Moreover, it was recognized that in the process of small chips compacting, there was obtained lower density than in the case of large chips.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/2974
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectcompactionen
dc.subjectaluminium chipsen
dc.subjectfinite element methoden
dc.subjectporosityen
dc.titleA COMPACTING PROCESS OF THE EN AW 6060 ALLOY
dc.typearticleen
dc.date.updated2017-02-09T10:01:48Z
dc.identifier.doihttps://doi.org/10.14311/AP.2015.55.0301
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Files in this item



This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International License
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International License