Now showing items 44-63 of 100

    • Gated Graphene Electrical Transport Characterization 

      Author: Náhlík , Josef; Janoušek , Michal; Šobáň , Zbyněk
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Graphene is a very interesting new material, and promises attractive applications in future nanodevices. It is a 2D carbon structure with very interesting physical behavior. Graphene is an almost transparent material that ...
    • Geometrical Modeling of Concrete Microstructure for the Assessment of ITZ Percolation 

      Author: Rypl , Daniel; Bým , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Percolation is considered to be a critical factor affecting the transport properties of multiphase materials. In the case of concrete, the transport properties are strongly dependent on the interfacial transition zone ...
    • Global Optima for Size Optimization Benchmarks by Branch and Bound Principles 

      Author: Pospíšilová , Adéla; Lepš , Matej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper searches for global optima for size optimization benchmarks utilizing a method based on branch and bound principles. The goal is to demonstrate the process for finding these global optima on the basis of two ...
    • GRB Duration Distribution Considering the Position of the Fermi 

      Author: Szécsi , D.; Bagoly , Z.; Horváth , I.; Balázs , L. G.; Veres , P.; Mészáros , A.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The Fermi satellite has a particular motion during its flight which enables it to catch the gamma-ray bursts mostly well. The side-effect of this favourable feature is that the lightcurves of the GBM detectors are stressed ...
    • Heat Exchangers for Condensation and Evaporation Applications Operating in a Low Pressure Atmosphere 

      Author: Kracík , Petr; Pospíšil , Jiří; Šnajdárek , Ladislav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents a state-of-the-art study of a heat transfer process in liquid spraying heat exchangers placed in a vacuum chamber. The experimental case studied here describes the behavior of a falling film evaporation ...
    • Hierarchical Modeling of Mastic Asphalt in Layered Road Structures Based on the MoriTanaka Method 

      Author: Valenta , Richard; Šejnoha , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      We present an application of the Mori-Tanaka micromechanical model for a description of the highly nonlinear behavior of asphalt mixtures. This method is expected to replace an expensive finite element-based fully-coupled ...
    • Holding Pressure and Its Influence on Quality in PIM Technology 

      Author: Petera , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The PIM (powder injection molding) process consists of several steps in which faults can occur. The quality of the part that is produced usually cannot be seen until the end of the process. It is therefore necessary to ...
    • Hygiena 3 a Forgotten Project for Electrolytic Water Treatment 

      Author: Drnek , Kryštof
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      In the interwar period, the city of Prague had to resolve the problem of treating the polluted water produced by its citizens. From 1933 - 1936 an ambitious competition was held. The idea behind the competition was to bring ...
    • HygroThermoMechanical Analysis of a Reactor Vessel 

      Author: Kruis , Jaroslav; Koudelka , Tomáš; Krejčí , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Determining the durability of a reactor vessel requires a hygro-thermo-mechanical analysis of the vessel throughout its service life. Damage, prestress losses, distribution of heat and moisture and some other quantities ...
    • Idealized Compression Ratio for a Screw Briquetting Press 

      Author: Biath , Peter; Ondruška , Juraj
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. ...
    • Influence of the Amount of Master Alloy on the Properties of Austenitic Stainless Steel AISI 316L Powder Sintered in Hydrogen 

      Author: Skaloń , Mateusz; Kazior , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      AISI 316L austenitic stainless steel powder was modified with four different amounts of boron (0.1; 0.2; 0.3; 0.4 of wt. %) in the form of MasterAlloy micro-powder, and was sintered in a pure dry hydrogen atmosphere in ...
    • Influence of the Surface Layer when the CMT Process Is Used for Welding Steel Sheets Treated by Nitrooxidation 

      Author: Michalec , I.; Marônek , M.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Nitrooxidation is a non-conventional surface treatment method that can provide significantly improved mechanical properties as well as corrosion resistance. However, the surface layer is a major problem during the welding ...
    • Influence of Various Process Parameters on the Density of Sintered Aluminium Alloys 

      Author: Laska , Mateusz; Kazior , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper presents the results of density measurements carried out on Alumix sintered parts. ECKA Alumix aluminium powders were used because of their wide application in the powder metallurgy industry. The compacts were ...
    • Integration of Autonomous UAVs into Multiagent Simulation 

      Author: Selecký , Martin; Meiser , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      In recent years, Unmanned Aerial Vehicles (UAVs) have attracted much attention both in the research field and in the field of commercial deployment. Researchers recently started to study problems and opportunities connected ...
    • Labscale Technology for Biogas Production from Lignocellulose Wastes 

      Author: Krátký , Lukáš; Jirout , Tomáš; Nalezenec , Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Currently-operating biogas plants are based on the treatment of lignocellulose biomass, which is included in materials such as agriculture and forestry wastes, municipal solid wastes, waste paper, wood and herbaceous energy ...
    • Laser Cutting of Materials of Various Thicknesses 

      Author: Grepl , Martin; Pagáč , Marek; Petrů , Jana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Thise paper deals with the application of laser technology and optimizing the parameters for cutting nickel alloy. The theoretical part of the paper describes various types of lasers, their principles and usage. The ...
    • Lifetime Assessment of a Steam Pipeline 

      Author: Janovec , Jiří; Poláchová , Daniela; Junek , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The aim of this paper is to design a method for assessing the life of steam pipes for Czech power plants. The most widely-used material in Czech power plants is steel 15 128. Our findings may also be applied for international ...
    • Massive Parallelization of Multibody System Simulation 

      Author: Valášek , Michael; Mráz , Ladislav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper deals with the decrease in CPU time necessary for simulating multibody systems by massive parallelization. The direct dynamics of multibody systems has to be solved by a system of linear algebraic equations. ...
    • Measurement of O2 in the Combustion Chamber of Apulverized Coal Boiler 

      Author: Janeba , Břetislav; Kolovratník , Michal; Bartoš , Ondřej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      Operational measurements of the O2 concentration in the combustion chamber of a pulverized coal boiler are not yet common practice. Operators are generally satisfied with measuring the O2 concentration in the second pass ...
    • Metallurgical Joining of Magnesium Alloys by the FSW Process 

      Author: Kupec , Tomáš; Hlavačová , Ivana; Turňa , Milan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      This paper deals with welding AZ 31Mg alloy by FSW (Friction Stir Welding) technology. Welds were fabricated with new equipment supplied from China for VUZ-PI Bratislava (Welding Research Institute — Industrial Institute). ...