Hledat
Zobrazují se záznamy 1-10 z 31
Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important ...
Modularity of Pressing Tools for Screw Press Producing Solid Biofuels
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study ...
EFFECTS OF INITIAL MOISTURE CONTENT ON THE PRODUCTION AND QUALITY PROPERTIES OF SOLID BIOFUEL
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
The moisture content of densified biomass is a limit parameter influencing the quality of the solid biofuel. It influences its calorific value, density, mechanical strength and dimensional stability as well as the production ...
Optimal Combustion Conditions for a Small-scale Biomass Boiler
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
This paper reports on an attempt to achieve maximum efficiency and lowest possible emissions for a small-scale biomass boiler. This aim can be attained only by changing the control algorithm of the boiler, and in this way ...
The Effect of Temperature on the Gasification Process
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
Gasification is a technology that uses fuel to produce power and heat. This technology is also suitable for biomass conversion. Biomass is a renewable energy source that is being developed to diversify the energy mix, so ...
OPERATING SPECIFICATIONS OF CATALYTIC CLEANING OF GAS FROM BIOMASS GASIFICATION
(České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
The paper focuses on the theoretical description of the cleaning of syngas from biomass and waste gasification using catalytic methods, and on the verification of the theory through experiments. The main obstruction to ...
Zásobování elektřinou izolovaného spotřebitele na Sibiři, Power supply system for an isolated consumer in the North
; Vedoucí práce: Vítek Miroslav; Oponent práce: Linhartová Adéla (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-06-16)
Tento článek popisuje řešení problému dodávky energie v podniku na severu. Cílem této práce je prostudovat různé možnosti napájení podniku a vybrat ekonomicky a technicky nejvýhodnější variantu. Pro dosažení těchto cílů ...
Bilance pyrolýzy odpadů s lignocelulózovým základem, Balance of pyrolysis for lignocellulosic wastes
; Vedoucí práce: Krátký Lukáš; Oponent práce: Svobodová Kateřina (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-08-22)
Tato práce obsahuje rešerši o odpadovém hospodářství, procesu pyrolýzy a jeho technickém řešení. Je zde popsán vytvořený model popisující zpracování odpadu s lignocelulózovým základem metodou pyrolýzy a pro účel práce je ...
Heating and Ventilation System Design for Villa House, Heating and Ventilation System Design for Villa House
; Vedoucí práce: Kabrhel Michal; Oponent práce: Urban Miroslav (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-06-25)
Tato bakalářská práce je zaměřena na problematiku navrhování systémů vytápění a větrání pro vilový dům v Novém Vestcí v České republice. Praktická část se skládá z nezbytných výpočtů a návrhu dispozičního řešení systému, ...
Fluidní sušení biomasy, Fluidized bed drying for biomass
; Vedoucí práce: Havlík Jan; Oponent práce: Skopec Pavel (České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2020-08-27)
Tato diplomová práce se zabývá fluidním sušením. Popisuje typy sušek a vysvětluje problém sušení a sušení ve fluidní vrstvě. Další část popisuje různé typy fluidních sušáren. V experimentální části jsou vyhodnoceny fluidní ...