Recently added

Now showing items 1-10 of 10

    • 3D MODELING OF HEAT AND MASS TRANSFER PROCESS DURING THE COMBUSTION OF SOLID FUEL IN A SWIRL FURNACE 

      Author: Askarova , Aliya; Bolegenova , Saltanat; Maximov , Valeriy; Bolegenova , Symbat; Nugymanova , Aizhan; Šafařík , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      In this work, a comprehensive study of thermal processes and aerodynamic and concentration characteristics of the combustion chamber of the boiler BKZ-75 of the Shakhtinskaya thermal power plant (Kazakhstan) are presented. ...
    • OPTIMIZATION OF COMPUTATIONAL BURDEN OF THE POINT INFORMATION GAIN 

      Author: Urban , Jan; Rychtáriková , Renata; Macháček , Petr; Štys , Dalibor; Urbanová , Pavla; Císař , Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      We developed a method of image preprocessing based on the information entropy, namely, on the information contribution made by each individual pixel to the whole image or to image’s part (i.e., a Point Information Gain; ...
    • ANALYSIS OF THE PROPERTIES OF AW2099 ALUMINIUMLITHIUM ALLOY WELDED BY LASER BEAM WITH AW5087 ALUMINIUMMAGNESIUM FILLER MATERIAL 

      Author: Sahul , Miroslav; Sahul , Martin; Pašák , Matej; Marônek , Milan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      EN AW2099 aluminium lithium alloy, 2.0mm in thickness, was used as an experimental material. EN AW2099 belongs to the 3rd generation of aluminium lithium alloys. The third generation was developed to improve the disadvantages ...
    • COMPARATIVE STUDY AND EMPIRICAL MODELLING OF PULVERIZED COCONUT SHELL PERIWINKLE SHELL AND PALM KERNEL SHELL AS A POZZOLANS IN CONCRETE 

      Author: Ikponmwosa , Efe Ewaen; Ehikhuenmen , Samuel Onosedeba; Irene , Karieren Kate
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Infrastructural development across the world is fast growing due to the rapid growth in population. This has resulted in consequently creating an increase in the demand for construction materials, especially cement. This ...
    • THE INFLUENCE OF BASALT MINERALS AS CEMENT SUBSTITUTION MATERIALS IN MORTAR 

      Author: Amin , Muhammad; Birawidha , David Candra; Isnugroho , Kusno; Hendronursito , Yusup; Sumardi , Slamet; Ario , Septa; Syafriadi , Syafriadi; Al-Muttaqii , Muhammad
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      This study was conducted to determine the effect of the concentration of basalt as a cement substitution material in mortar. Basalt was analysed by XRD and XRF. From the XRD results, the diffractogram shows the dominant ...
    • GASPUFF TARGET FOR LASERPRODUCING PLASMA SXR SOURCE 

      Author: Salačová , Šárka; Wachulak , Przemyslaw; Tatíček , Milan; Vrbová , Miroslava
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Mass density spatial distributions of selected gas-puff targets have been determined by radiography, using quasi-monochromatic radiation at a wavelength of 13 nm. Results of spatial distributions of mass densities at various ...
    • IMPORTANCE OF A TYPE OF GATING SYSTEM IN INVESTMENT CASTING TECHNOLOGY 

      Author: Vrátný , Ondřej; Herman , Aleš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      At present, there is an increasing demand for the Investment casting technology. It is necessary to ensure their dimensional accuracy as well as internal quality and their desired macrostructure and microstructure. This ...
    • APPLICABILITY VERIFICATION OF AUTOFORM SOFTWARE FOR FEM SIMULATION OF MECHANICAL FIXATION OF HEMMED JOINTS 

      Author: Chrášťanský , Lukáš; Šanovec , Jan; Martawirya , Yatna Yuwana; Valeš , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      This paper deals with the problematics of fixation of hemmed joints, especially with one specific mechanical method how to ensure a dimensional stability of a hemmed joint of car-body parts, such as doors, bonnet and trunk ...
    • STUDY OF SYNTHETIC DYE REMOVAL USING FENTON/TiO2 FENTON/UV AND FENTON/TiO2/UV METHODS AND THE APPLICATION TO JUMPUTAN FABRIC WASTEWATER 

      Author: Agustina , Tuty Emilia; Teguh , Dedi; Wijaya , Yourdan; Mermaliandi , Febrian; Bustomi , Ahmad; Manalaoon , Jantan; Theodora , Gita; Rebecca , Tessa
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Synthetic dyes were commonly used in textile industries such as Jumputan fabric industries in South Sumatera. Most of these industries were categorized as a home industry without a wastewater treatment plant, so the ...
    • PNEUMATIC SYSTEMS FOR AUTOMATIC SORTING EQUIPMENT 

      Author: Onderová , Iveta; Čačko , Viliam; Kolláth , Ľudovít; Šooš , Ľubomír; Smelík , Andrej; Varga , Alexander
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The aim of the research work was focused on a research of manipulators design using suction grippers. The results of the research can be applied in the design of jigs - manipulators for handling thin sheets. The FME analysis ...