THE INFLUENCE OF CUTTING CONDITIONS ON THE SELECTED PARAMETERS OF THE SURFACE INTEGRITY
dc.contributor.author | Čep , Robert | |
dc.contributor.author | Malotová , Šárka | |
dc.contributor.author | Lichovník , Jiří | |
dc.contributor.author | Hatala , Michal | |
dc.contributor.author | Legutko , Stanislaw | |
dc.date.accessioned | 2019-03-14T09:11:36Z | |
dc.date.available | 2019-03-14T09:11:36Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | Acta Polytechnica. 2018, vol. 58, no. 6, p. 334-338. | |
dc.identifier.issn | 1210-2709 (print) | |
dc.identifier.issn | 1805-2363 (online) | |
dc.identifier.uri | http://hdl.handle.net/10467/81432 | |
dc.description.abstract | The article deals with an investigation of residual stress in machined surface under conditions of high-feed milling and determination of the influence of machining conditions on the size and types of stress resulting from cutting into the machined surface. As a testing material, the hardened tool steel W. Nr. 1.2343 (CSN 19552) was used. For the realization of the experimental activity, a high-feed milling head was used with exchangeable cutting inserts marked H600 WXCU 070515T. All surfaces were machined under different cutting conditions (200, 300, 350, 400 and 500mmin−1 cutting speed) in regard to the recommended parameters and machine tool options. The evaluated residual stress was measured in the depth of 8 μm under the surface with the device PROTO iXRD working on the principle of the X-Ray diffraction. Monitoring was carried out using an analysis of occurrence of tensile or compressive residual stress, and from these results, a possible dependence of the residual stress on the cutting conditions during milling process was determined. | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | |
dc.publisher | České vysoké učení technické v Praze | cs |
dc.publisher | Czech Technical University in Prague | en |
dc.relation.ispartofseries | Acta Polytechnica | |
dc.relation.uri | https://ojs.cvut.cz/ojs/index.php/ap/article/view/5043 | |
dc.rights | Creative Commons Attribution 4.0 International License | en |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | |
dc.subject | residual stress, milling, machining, X-ray diffraction, surface integrity | en |
dc.title | THE INFLUENCE OF CUTTING CONDITIONS ON THE SELECTED PARAMETERS OF THE SURFACE INTEGRITY | |
dc.type | article | en |
dc.date.updated | 2019-03-14T09:11:36Z | |
dc.identifier.doi | 10.14311/AP.2018.58.0334 | |
dc.rights.access | openAccess | |
dc.type.status | Peer-reviewed | |
dc.type.version | publishedVersion |
Soubory tohoto záznamu
Tento záznam se objevuje v následujících kolekcích
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License