• ON SELF-SIMILARITIES OF CUT-AND-PROJECT SETS 

      Autor: Masáková , Zuzana; Mazáč , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Among the commonly used mathematical models of quasicrystals are Delone sets constructed using a cut-and-project scheme, the so-called cut-and-project sets. A cut-and-project scheme (L,π1, π2) is given by a lattice L in Rs ...
    • ON THE COMMON LIMIT OF THE PT-SYMMETRIC ROSEN–MORSE II AND FINITE SQUARE WELL POTENTIALS 

      Autor: Kovács , József; Lévai , Géza
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Two PT-symmetric potentials are compared, which possess asymptotically finite imaginary components: the PT-symmetric Rosen-Morse II and the finite PT-symmetric square well potentials. Despite their different mathematical ...
    • ON THE SPECTRUM OF THE ONE-DIMENSIONAL SCHRÖDINGER HAMILTONIAN PERTURBED BY AN ATTRACTIVE GAUSSIAN POTENTIAL 

      Autor: Fassari , Silvestro; Gadella , Manuel; Nieto Miguel, Luis; Rinaldi , Fabio
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      We propose a new approach to the problem of finding the eigenvalues (energy levels) in the discrete spectrum of the one-dimensional Hamiltonian with an attractive Gaussian potential by using the well-known Birman-Schwinger ...
    • OPTIMIZATION METHOD AND SOFTWARE FOR FUEL COST REDUCTION IN CASE OF ROAD TRANSPORT ACTIVITY 

      Autor: Kovács , György
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The transport activity is one of the most expensive processes in the supply chain and the fuel cost is the highest cost among the cost components of transportation. The goal of the research is to optimize the transport ...
    • PARAMETERS EFFECTING FORCED VORTEX FORMATION IN BLADE PASSAGEWAY OF DYNAMIC AIR CLASSIFIER 

      Autor: Adamčík , Martin; Svěrák , Tomáš; Peciar , Peter
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Air classification of particulate materials is a method of classifying particles into coarse and fine fractions based on their size, density, or shape. Performance of the rotor air classifier is affected by operating ...
    • PLATFORM WITH CAMERA SYSTEM FOR MEASUREMENT OF COMPENSATORY MOVEMENTS OF SMALL ANIMALS 

      Autor: Kutílek , Patrik; Škoda , David; Hýbl , Ján; Černý , Rudolf; Frynta , Daniel; Landová , Eva; Frýdlová , Petra; Kurali , Aniko; Doskočil , Radek; Křivánek , Václav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The article introduces systems and methods of a controllable rotational platform used for measuring compensatory movement of small animals. The system, based on a camera subsystem, is located on a mechanical platform powered ...
    • POSSIBILITY OF MONITORING OF PAHs DISTRIBUTION IN THE VERTICAL PROFILE AT THE BACKGROUND METEOROLOGICAL STATION KREŠÍN RETRACTED 

      Autor: Strnadová , Gabriela; Hanuš , Vlastimil; Kahoun , David; Semerák , Petr; Tříska , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      ARTICLE HAS BEEN RETRACTED BY EDITORIAL OFFICE, UPON AN APPROVAL OF ALL AUTHORSThe contaminants present in the atmosphere have a substantial impact on public health. Among contaminants, the most important are polycyclic ...
    • PRELIMINARY STUDY ON COMBUSTION AND OVERALL PARAMETERS OF SYNGAS FUEL MIXTURES FOR SPARK IGNITION COMBUSTION ENGINE 

      Autor: Toman , Rastislav; Polóni , Marián; Chríbik , Andrej
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      This paper presents a numerical study on a group of alternative gaseous fuels – syngases, and their use in the spark-ignition internal combustion engine Lombardini LGW 702. These syngas fuel mixtures consist mainly of ...
    • PROPERTIES AND MICROSTRUCTURE OF CEMENT PASTE INCLUDING RECYCLED CONCRETE POWDER 

      Autor: Topič , Jaroslav; Prošek , Zdenek
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The disposal and further recycling of concrete is being investigated worldwide, because the issue of complete recycling has not yet been fully resolved. A fundamental difficulty faced by researchers is the reuse of the ...
    • RATIONALLY EXTENDED SHAPE INVARIANT POTENTIALS IN ARBITRARY D DIMENSIONS ASSOCIATED WITH EXCEPTIONAL Xm POLYNOMIALS 

      Autor: Yadav Kumar, Rajesh; Kumari , Nisha; Khare , Avinash; Mandal Prasad, Bhabani
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Rationally extended shape invariant potentials in arbitrary D-dimensions are obtained by using point canonical transformation (PCT) method. The bound-state solutions of these exactly solvable potentials can be written in ...
    • RELATION BETWEEN LEFT VENTRICULAR UNLOADING DURING ECMO AND DRAINAGE CATHETER SIZE ASSESSED BY MATHEMATICAL MODELING 

      Autor: Strunina , Svitlana; Hozman , Jiri; Ostadal , Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The flow-dependent left ventricle overload is a well-known complication of the veno-arterial extracorporeal membrane oxygenation in a severe cardiogenic shock, which leads to a distension of the left ventricle and, frequently, ...
    • SILOXANES REMOVAL FROM BIOGAS USING ACTIVATED CARBON 

      Autor: Vagenknechtová , Alice; Ciahotný , Karel; Vrbová , Veronika
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      SiO2 deposits which cause technical problems on combustion equipment are built by combustion of biogas containing siloxanes. Therefore, in these cases, the siloxanes must be removed from the biogas. For siloxane removal ...
    • SIMPLE MODELS OF THREE COUPLED PT -SYMMETRIC WAVE GUIDES ALLOWING FOR THIRD-ORDER EXCEPTIONAL POINTS 

      Autor: Schnabel , Jan; Cartarius , Holger; Main , Jörg; Wunner , Günter; Heiss , Walter Dieter
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      We study theoretical models of three coupled wave guides with a PT-symmetric distribution of gain and loss. A realistic matrix model is developed in terms of a three-mode expansion. By comparing with a previously postulated ...
    • STRENGHT AND DYNAMIC ANALYSIS OF A STRUCTURAL NODE LIMITING THE MULTI-OUTPUT GEAR MECHANISM 

      Autor: Kačalová , Mária; Pavlenko , Slavko
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The rapidly advancing technological development leads to designing and researching a new multi- output gear mechanism. The investigated new double-output gear mechanism has two output coaxial shafts located against the ...
    • SURFACE CONSOLIDATION OF WALL PAINTINGS USING LIME NANO-SUSPENSIONS 

      Autor: Vojtěchovský , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      Within the field of the conservation of historical and cultural monuments, lime nanosuspensions are still a relatively new and unexplored material. This study examines their effect on the consolidation of architectural ...
    • TEARING MODES GROWTH RATE AMPLIFICATION DUE TO FINITE CURRENT RELAXATION 

      Autor: Mendonça da Silveira , Francisco Eugenio
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      In this work, we explore the influence of perturbative wavelengths, shorter than those usually considered, on the growth rate γ of the tearing modes. Thus, we adopt an extended form of Ohm’s law, which includes a finite ...
    • THE ANALYSIS OF IMAGES IN N-POINT GRAVITATIONAL LENS BY METHODS OF ALGEBRAIC GEOMETRY 

      Autor: Kotvytskiy , Albert; Bronza , Semen; Shablenko , Vladimir
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      This paper is devoted to the study of images in N-point gravitational lenses by methods of algebraic geometry. In the beginning, we carefully define images in algebraic terms. Based on the definition, we show that in this ...
    • THE IMPACT OF SELECTED PROCESSES AND TECHNOLOGICAL PARAMETERS ON THE GEOMETRY OF THE WELD POOL WHEN WELDING IN SHIELS GAS ATMOSPHERE 

      Autor: Bradáč , Josef; Moravec , Jaromír
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      This paper is focused on welding with a consumable electrode in a gas shield atmosphere and its main aim is to show the influence of selected processes and technological parameters on the geometry of the weld pool in terms ...
    • TRANSITION METAL OXIDES AS MATERIALS FOR ADDITIVE LASER MARKING ON STAINLESS STEEL 

      Autor: Mihalev Stoyanov, Mihail
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The product information plays an important role in the improvement of the manufacturing, allowing the tracking of the part through the full life cycle. Laser marking is one of the most versatile techniques for this purpose. ...
    • UNDERGROUND AIR DUCT TO CONTROL RISING MOISTURE IN HISTORIC BUILDINGS: IMPROVED DESIGN AND ITS DRYING EFFICIENCY 

      Autor: Pazderka , Jiří; Hájková , Eva; Jiránek , Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The underground air ducts along peripheral walls of a building are a remediation method, which principle is to enable an air flow along the moist building structure’s surface to allow a sufficient evaporation of moisture ...