Zobrazit minimální záznam

dc.contributor.authorSedlak , Josef
dc.contributor.authorZemčík , Oskar
dc.contributor.authorSlaný , Martin
dc.contributor.authorChladil , Josef
dc.contributor.authorKouřil , Karel
dc.contributor.authorSekerka , Vít
dc.contributor.authorRozkošný , Luboš
dc.date.accessioned2017-02-09T09:59:36Z
dc.date.available2017-02-09T09:59:36Z
dc.date.issued2015
dc.identifier.citationActa Polytechnica. 2015, vol. 55, no. 4, p. 260-266.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/67210
dc.description.abstractUnconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.). Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS), which falls into the group of additive technologies of Rapid Prototyping (RP). The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/2493
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectrapid prototyping, DMLS, prototype, 3D print, laseren
dc.titlePRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY
dc.typearticleen
dc.date.updated2017-02-09T09:59:36Z
dc.identifier.doihttps://doi.org/10.14311/AP.2015.55.0260
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Soubory tohoto záznamu



Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

Creative Commons Attribution 4.0 International License
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License