Zobrazit minimální záznam



dc.contributor.authorJanásek , Adam
dc.contributor.authorČep , Robert
dc.contributor.authorBrychta , Josef
dc.date.accessioned2017-02-08T11:56:41Z
dc.date.available2017-02-08T11:56:41Z
dc.date.issued2012
dc.identifier.citationActa Polytechnica. 2012, vol. 52, no. 4.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/66960
dc.description.abstractThis paper deals with the control parameters for selected geometric accuracy measurements for a machine tool. The parameters were needed after a refurbished milling machine was purchased. After setting up the machine, it was necessary to check the geometric accuracy that can be used for precise milling. The whole check was performed in accordance with ISO 10791. Only selected parameters of geometric accuracy were inspected, and they were later compared with the prescribed values. On the basis of a comparison of these values we were able to determine whether the machine tool can be used for accurate machining.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/1594
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectgeometric accuracyen
dc.subjecttestingen
dc.subjectmilling machineen
dc.titleChecking the Geometric Accuracy of a Machine Tool for Selected Geometric Parameters
dc.typearticleen
dc.date.updated2017-02-08T11:56:41Z
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Soubory tohoto záznamu



Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

Creative Commons Attribution 4.0 International License
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License