Show simple item record

dc.contributor.authorBiath , Peter
dc.contributor.authorOndruška , Juraj
dc.date.accessioned2017-02-08T11:54:13Z
dc.date.available2017-02-08T11:54:13Z
dc.date.issued2012
dc.identifier.citationActa Polytechnica. 2012, vol. 52, no. 3.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/66931
dc.description.abstractThis paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/1536
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectscrew briquetting pressen
dc.subjectcompression ratioen
dc.subjectcalculation of compression ratioen
dc.titleIdealized Compression Ratio for a Screw Briquetting Press
dc.typearticleen
dc.date.updated2017-02-08T11:54:13Z
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Files in this item



This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International License
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International License