Nedávno přidané

Zobrazují se záznamy 1-10 z 10

    • AN EXPERIMENTAL ASSESSMENT OF THE PLATE HEAT EXCHANGER CHARACTERISTICS BY WILSON PLOT METHOD 

      Autor: Opatřil , Jan; Havlík , Jan; Bartoš , Ondřej; Dlouhý , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      An aim of this paper is suggestion of the evaluation method based on the experimental data and the Wilson plot method for the Plate Heat Exchangers (PHE). For the purpose of the project the new experimental loop was built ...
    • A QUANTITATIVE EVALUATION OF THE WATER DISTRIBUTION IN A SOIL SAMPLE USING NEUTRON IMAGING 

      Autor: Šácha , Jan; Sněhota , Michal; Hovind , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This paper presents an empirical method by Kang et al. recently proposed for correcting two-dimensional neutron radiography for water quantification in soil. The method was tested on data from neutron imaging of the water ...
    • BACK TO BASICS: TOWARDS NOVEL COMPUTATION AND ARRANGEMENT OF SPATIAL SENSORY IN IMAGES 

      Autor: Wen , Wei; Khatibi , Siamak
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The current camera has made a huge progress in the sensor resolution and the lowluminance performance. However, we are still far from having an optimal camera as powerful as our eye is. The study of the evolution process ...
    • A METHOD FOR MEASURING THE SENSITIVITY OF BUILDING STRUCTURAL MEMBERS TO FIRE DECAY PHASES 

      Autor: Gernay , Thomas
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Firefighters face a major threat when intervening in a building during a fire: the possibility of structural collapse during the cooling phase of the fire, or soon thereafter. At present, this threat is amplified by the ...
    • IMPACT OF PLASTIC DEFORMATION ON THE PROPERTIES OF A SELECTED ALUMINIUM ALLOY 

      Autor: Lišková , Anna; Lacková , Petra; Mihaliková , Mária; Kočiško , Róbert
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This paper reports on an experiment to assess the influence of plastic deformation on the microstructure and properties of EN AW 6012 (AlMgSiPb) aluminium alloy in two states. The first was the initial state with heat ...
    • EXPERIMENTAL EVALUATION OF WEDM MACHINED SURFACE WAVINESS 

      Autor: Mouralova , Katerina; Kovar , Jiri; Houska , Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Wire Electrical Discharge Machining (WEDM) an unconventional machining technology which has become indispensable in many industries. The typical morphology of a surface machined using the electrical discharge technology ...
    • OPTIMALIZATION OF AFTERBURNER CHANNEL IN BIOMASS BOILER USING CFD ANALYSIS 

      Autor: Pospíšil , Jiří; Lisý , Martin; Špiláček , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This contribution presents the results of parametrical studies focused on the mixing process in a small rectangular duct within a biomass boiler. The first study investigates the influence of a local narrowing located in ...
    • CYCLIC STRESS ANALYSIS OF POLYESTER ARAMID POLYETHYLENE AND LIQUID CRYSTAL POLYMER YARNS 

      Autor: Vannucchi de Camargo , Felipe; Marcos Guilherme Eduardo, Carlos; Fragassa , Cristiano; Pavlovic , Ana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Mooring ropes used in offshore oil platforms are exposed to a set of extreme environmental conditions that can be crucial to their behaviour in service. Considering the elevated mechanical demands on these ropes imposed ...
    • EXPERIMENTAL INVESTIGATION ON CHROMIUMVI REMOVAL FROM AQUEOUS SOLUTION USING ACTIVATED CARBON RESORCINOL FORMALDEHYDE XEROGELS 

      Autor: Oyedoh A., Eghe; Ekwonu C., Michael
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The adsorption of chromium(VI) metal ion in aqueous solutions by activated carbon resorcinol formaldehyde xerogels (ACRF) was investigated. The results showed that pore structure, surface area and the adsorbent surface ...
    • ANALYSIS OF INTENSIVELY BLASTED ELECTRIC ARC BURNING IN THE ARC HEATER'S ANODE CHANNEL 

      Autor: Senk , Josef; Jakubova , Ivana; Laznickova , Ilona
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The paper deals with the description of the intensively blasted electric arc burning in Ar in the anode channel of the arc heater operated under various conditions. Directly measured experimental data (current, voltage, ...